DB3710DB Samsung Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lorelei from Collinsville, IL
- Parts Used:
- 99002659
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Dishwasher started making loud grinding noise
Removed the bottom spray arm, the filter cover the filter ane the impeller. Then put it back together. Worked like a champ.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kent from central city, NE
- Parts Used:
- 99002815
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
after wash cycle there was water in bottom of unit
took off drain hose pulled out flapper on the pump side and installed new one then put everything back together
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judi from Katy, TX
- Parts Used:
- 99002644
- Difficulty Level:
- Really Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
The dishwasher door was fitted with a plastic striker. It obviously wasn't meant to last, and eventually broke. This meant that the door would not shut properly, so I couldn't use the dishwasher.
I pulled out the dishwasher a little to expose the screw on the striker, (located on top of the dishwasher. The annoying thing was, it wasn't a regular screw, so unfortunately I had to go out and buy a torx screwdriver (which cost more than the new striker). It would have been so much quicker, and cost effective, if it had been a normal screw. Anyway, I completed the job and pushed the dishwasher back into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ruth from Canyon Lake, CA
- Parts Used:
- WPW10275768
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
The dishwasher door latch was broken and would not hold the door closed.
I unplugged the dishwasher under the sink. I opened the dishwasher up and took out the 12 screws holding the inside door facing on. I gently moved the door facing down towards the dishwasher to reveal the door locking mechanism at the top of the door. I unplugged the mechanism and plugged in the new one. I put the door back together the same way I had taken it apart. In all it took about 12 minutes. Works like a charm.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deena from Litchfield, NH
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lower wheel assembly broke off
just snapped the wheels on. It took less than 10 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roberto from Cedar Falls, IA
- Parts Used:
- WPW10275768, WP99002751
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door latch handle failed
Install complete latch and handle assembly. Remove panel, disconnect wiring and install the assembly
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Norman from Worthington, MA
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The wheel axle snapped off so the bottom dishwasher tray didn't close correctly
eash as pie. snap them onto the piece of frame on the bottom rack and the problem is solved
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathryn from Apopka, FL
- Parts Used:
- 99002654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Dishes on bottom rack not clean
I examined the arm on the floor of the dishwasher and found that it had collided with something sticking through the bottom of the lower rack. One of the jets on the tip of the arm, which was supposed to spray sideways to make the arm spin, was missing its top and now sprayed up. This put the arm off balance and kept it from spinning. I ordered a new arm from PartSelect. It arrived much sooner than I expected. With the pliers, I unscrewed the nut holding the arm on, replaced it with the new arm, and refastened the nut. The next time I used the dishwasher all the dishes on the bottom rack were clean.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from Novato, CA
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
2 wheel roller attachments broke
Followed the video instructions. Couldn't have been easier. Bought 2 extras for the inevitable breakdown of others.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Angela from Whitehall, WI
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I got my parts from you
I haven't gotten to our rental to get the job done yet but it should go real easy because the broken one came off real easy these should go on just as easy. Thanks again for the parts
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Poughquag, NY
- Parts Used:
- 99002654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
missing plastic nut on lower wash arm
Remove lower basket. put nut on verticle shaft, turn clockise by hand, use pliers gently to secure and replave lower basket.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sammie from Fort Sumner, NM
- Parts Used:
- 99002588
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishwasher was leaking
Ordered part #2099940. Removed existing gasket, cleaned the area and replaced it with new one - so simple. No tools required.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jane D. from Parker, CO
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower rack wheel missing/replaced
Popped the wheel part on the rack. No problem and the dishwaher was ready to go.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Teresa from Santa Fe, NM
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bottom rack wheel replacement
snapped it on to the rack shaft
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randall V from Loveland, OH
- Parts Used:
- WPW10275768
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
door wasn't latching and started its cycle before door was shut
I just followed another persons directions that was in the system already. He had a great idea by taking the new switches out of the new latch and replacing them with the old ones from the bad latch. The old switches are still good and it made for a simple repair. This way you didn't have to disconnect the wire from the switches and now you have two new switches on hand. The old switch had a burnt spot on the connector.
Was this instruction helpful to you?
Thank you for voting!