GDWT306V00BB General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Donna from Arlington, TN
- Parts Used:
- WD15X10014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Water leaking out from bottom of Dishwaser
Very easy! Removed 4 screws that was holding the valve to the bracket. Placed bracket over water inlet line. Attached copper threaded coupling with pliers.Screwed valved on to the coupling. Attached bracket to the valve with 4 screws. Reattached water line. Attached bracket to frame of dishwaser. Put kickplate back on and done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glen from Garland, TX
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Wheels kept coming off dishwasher basket upon pull out
I hand removed the snap in wheel axels and replaced the axles with new ones, by hand, no tools needed. On this dishwasher basket the wheeel axels just snap onto the metal cage "wires" of the roll out basket holding the dishes. Very simple. Used pliers to squeeze each old axle retaining nubs,from each of the eight wheels, , then just slipped (pulled the wheels off the axles) and discared only axles (that here the problem, detaching frequently from grasping the pull out dish basket, due to heat taking the temper out of their gripper (to basket).
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gale from Highlands Ranch, CO
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
The axles on the rack wheels kept coming unclipped
I set the rack upside down on the counter. Snapped the new axles into the new wheels. Snapped the wheels onto the rack. The new style axles are better than the factory parts. They look different in the picture so I was not sure if I was getting the right thing but they worked great. Took longer to take the parts out of the bags than to install. Nice to have the rack slide in and out properly again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Juan from Pasadena, TX
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Wheels fell off and melted with heater ring
I installed the clips and then the new wheels. Very simply to do.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOHN from FAIRFAX, VA
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
worn out wheel and stud rollers
easy push on repair parts no tools needed
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- SANDRA from MENDOTA HEIGHTS, MN
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels falling off bottom drawer
Very annoying problem with wheels falling off of the bottom dishwasher rack. Thanks to good advice here, purchased wheels AND wheel axels. Axels snap into the wheels, and the wheels snap on the bottom rack. Wheels are wider that the originals, and these snap ons are a much better design. Rack rolls in and out better than brand new!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Damon from Austin, TX
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Rack does not roll correct, falls into tub
Removed old wheels and axles, installed new axles in wheels, clipped into place. I purchased new wheels and axles. Probably only needed the axles. The front wheels are narrower than the rear wheels. This probably contributes to them falling off the track. Since I purchased 8 new wheels (all wide, now I know what the second part number was for)I put all wide on. Seems to be more stable that way. New straight style axle clip appears more robust than the old side clip style. Thanks Parts select
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- steven from westbrook, CT
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
worn out wheels and axles
pop of the old, pop on the new! Wife happy, Priceless
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Nolensville, TN
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wheels would not stay on
poor engineering design of lower basket wheel attachment. With time the c-clips designed to attach wheels to basket axles lost their 'torque-grip' strength allowing the wheels to fall off into the bottom of the dishwasher and melt against the drying element. The replacement clips for the wheels have a very different design and attach to the basket axles in a manner that makes it almost impossible to come off without forcing/breaking them off. I don't know what the name of the new design is, but my hat's off to the engineer(s) who developed it. Amazing how something so simple can make life so much easier. WBB
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- george from shingle springs, CA
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The original design of the axle made it susceptible to coming off
Removed old wheel and axle. New wheel pops on to axle, then put hole in wheel on wheel stud and align clip to attach to vertical support behind wheel stud. Push wheel on and clip attaches. Easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cody from Mount Dora, FL
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels fell off the bottom rack of dishwasher
Couldn't have been easier-snap, snap, snap.Took advice of another post and put the wheel and axle part together before snapping onto rack. !
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Johnny from Edmond, OK
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken axle/wheels on lower basket
It took longer to unpack teh parts than it did to repair. Simply snaped the wheels onto the axels and then snaped the assembled units axle supports on the lower basket. Reinstalled the lower basket in the dishwasher tub and all is great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- alexander from bethesda, MD
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wheels kept falling off
New wheels are snap on, do not fall off, great repair
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gina from Cooper City, FL
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replacing bottom dishwasher rollers
Just clip on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Margaret from Miller Place, NY
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replaced Lower Rack Axles (8) and Wheels (8).
Old wheels and axles pulled off very easily. Axle popped into wheels then wheels placed on basket shaft and axles locked on to basket with a gentle push. Done in 5 minutes. Ordering from PartSelect couldn't have gone smoother. I ordered the parts Saturday afternoon 10/15/2011. I immediatly recieved an Email confirmation the parts were in stock and would be shipped on Monday. On Monday I recieved an Email confirming the parts were shipped. The parts arrived Tuesday at 2:45pm. The repair was completed by 2:55pm. Thank you PartSelect!
Was this instruction helpful to you?
Thank you for voting!