GDWT306V00BB General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Valerie from Puyallup, WA
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Front right wheels falling off lower dishwasher rack
The two lower right wheels kept falling off, then one fell down and was partly melted by the heating unit on the bottom. I went on line,read some of the do it yourself repairers to see what they did. Looked up the parts, (used the back wheels to put on the front)ordered it, delivery was just a few days and within 10 minutes done. It was just that easy. Thank you for making it that easy, a lot of us are trying to save where we can these days and that helped a lot.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Cincinnati, OH
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
wheels that allowed racks to roll on were broken
Removed broken wheels & clips from the lower rack. Easily replaced the clips and wheels with the new clips & wheels which are better built then original. The dishwasher now operates better then in its new state because the bottom rack sits higher and the bottom arm swings more efficiently and the dishes are coming out cleaner.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from Tinton Falls, NJ
- Parts Used:
- WD22X10029
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
The old plastic filter's corner were bent up allow food to get into the plumbing going to the articulation sprayers and clogging them.
Remove bottom articulating sprayer and water fittings. Remove and replace filter
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ricardo from Miami, FL
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The lower rack's wheels were coming off
The parts came really fast, I did not even have time to think about them...when they came I was like what? They are here? WOW! anyway, I just changed the wheels with the new axel and perfect! now it works wonderful...and it was so easy! I can't believe I dealt with that for as long as I did.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marvin from Eastport, NY
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace wheels on dishwasher basket
The parts arrived promptly following my order. I needed to replace four wheels on the dishwasher slide-out basket. It was easy to order using the visual parts-explosion images on the site. I needed to order wheels and saw they each required a hub, so the ordering was easy.
The assembly needed no tools, and the repacement parts were better in fact than the original parts they replaced, as they snapped easily onto the basket.
The entire process, from ordering to assembly, was a good experience, and I bookmarked the site for my future parts-replacement requirements.
The assembly needed no tools, and the repacement parts were better in fact than the original parts they replaced, as they snapped easily onto the basket.
The entire process, from ordering to assembly, was a good experience, and I bookmarked the site for my future parts-replacement requirements.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Howard from Montgomery Village, MD
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The lower tray wouldn't roll because the wheels fell off.
Removed the wheels and the axles from them and put new axles in place on each wheel then replaced the wheels on the tray.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Draper, UT
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Wheels on the bottom tray
It only took 10 minutes and they had the right parts and I got them in 2 days. I am ashamed to say that I let this go for a couple of months and for about $20 and 10 minues, I was able to take care of the the issue. The3 wife is thrilled.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Katie from Racine, WI
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The old wheels were continuously falling off the lower rack. We had to lift the rack in and out of the dishwasher - total pain in the neck.
I removed what few remaining wheel assemblies there were - just pulled them off - no tools needed. Then I assembled the new wheels and wheel axels and simply snapped them on to the lower rack! It was a piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from Colonia, NJ
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken wheel axel because it is not made to sterdy
took out broken wheel axel and replaced it with a new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Nolensville, TN
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wheels would not stay on
poor engineering design of lower basket wheel attachment. With time the c-clips designed to attach wheels to basket axles lost their 'torque-grip' strength allowing the wheels to fall off into the bottom of the dishwasher and melt against the drying element. The replacement clips for the wheels have a very different design and attach to the basket axles in a manner that makes it almost impossible to come off without forcing/breaking them off. I don't know what the name of the new design is, but my hat's off to the engineer(s) who developed it. Amazing how something so simple can make life so much easier. WBB
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- george from shingle springs, CA
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The original design of the axle made it susceptible to coming off
Removed old wheel and axle. New wheel pops on to axle, then put hole in wheel on wheel stud and align clip to attach to vertical support behind wheel stud. Push wheel on and clip attaches. Easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cody from Mount Dora, FL
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels fell off the bottom rack of dishwasher
Couldn't have been easier-snap, snap, snap.Took advice of another post and put the wheel and axle part together before snapping onto rack. !
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Johnny from Edmond, OK
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken axle/wheels on lower basket
It took longer to unpack teh parts than it did to repair. Simply snaped the wheels onto the axels and then snaped the assembled units axle supports on the lower basket. Reinstalled the lower basket in the dishwasher tub and all is great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- alexander from bethesda, MD
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wheels kept falling off
New wheels are snap on, do not fall off, great repair
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gina from Cooper City, FL
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replacing bottom dishwasher rollers
Just clip on
Was this instruction helpful to you?
Thank you for voting!