Part Location Diagram of WH1X2117 GE Timer Knob Clip
See part 9 in the diagram
Replacing your General Electric Washer Timer Knob Clip
( Grid squares measure 1x1 inch )

Timer Knob Clip WH1X2117

Rated by 13 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$10.99
In Stock
Fix Number:
FIX270835
Manufacturer #:
WH1X2117
Manufactured by:
GE

Product Description

This plastic clip is a genuine OEM part, used to help connect the timer knob to the shaft on your washer. If the clip has become damaged it will need to be replaced. The clip is found on the backside of the timer knob, and if the clip has become damaged the knob may not stay in place or advance through the settings. To do this repair you may need a pair of needle nose pliers to remove the old clip and to ensure the new one is securely in place.

Videos For installing this part.

Replacing your Timer Knob Clip

Replacing your Timer Knob Clip

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Timer Knob
$17.92
In Stock
Dial with Compression Ring
$14.28
In Stock
Timer Knob with Clip
$19.82
In Stock
Compression Ring
$19.30
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.6 / 5.0, 13 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Kevin from LAS VEGAS, NV
Parts Used:
WH01X10310, WH1X2117
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Timer knob base teeth were gone and couldn’t engage the selector.
Removed clip holding knob on and replaced both. Only difficulty was trying to see the clip to remove it. Ended up bending the clip. Replacement was easy.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Samuel from Phoenix, AZ
Parts Used:
WH11X10033, WH1X2117, WH01X10310
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
timer dial not positioned. Know cogs kworn
Removed holding clip. Pulled knob off. Removed dial. reversed procedure to repair. Very easy
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from CLIFTON, NJ
Parts Used:
WH11X10049, WH01X10310, WH1X2117
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Knob replacement
Unplugged washer. Using needle nose pliers removed old knobs and installed new ones. Your how to video was helpful.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Rancho Murieta, CA
Parts Used:
WH1X2117
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Timer
The part was slightly different and did not fit
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from Palatine Bridge, NY
Parts Used:
WH11X10047, WH01X10314, WH01X10313, WH1X2117
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Control Knobs woren out
pulled old ones off pushed new ones on done in no time. Knobs look just like old ones.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Trisha from Alma, NE
Parts Used:
WH11X10049, WH01X10310, WH02X10093, WH1X2721, WH1X2117
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Knob Stripped Out - Broke
Watched install video - snapped it on - problem fixed.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mike from Malakoff, TX
Parts Used:
WH11X10049, WH01X10310, WH1X2117
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Timer knob teeth worn off.could not select wash cycle.
First the exploded view provided in your website helped greatly I could see exactly what parts were involved. UPLUG WASHER ! 3 screws removed from back of control panel removed and the panel comes forward (hint..slide to right and it will detach from base making access easier) Pull knob out giving more room to remove plastic clip and knob comes off. 1 screw that holds timer in place removed and unplug the wiring harness. Reassemble using new parts in same manor as disassembly. Hint for putting clip on back of knob..place the clip partially on back of knob in the slot, put knob on shaft then using needle nose push the clip in place. Identifying and ordering parts here was a snap and saved me a bunch of money by not having to call a repair service. Thanks
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Orren from Brick, NJ
Parts Used:
WH11X10049, WH01X10310, WH1X2117
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Timer would not advance on any cycle.
I removed the timer knob clip with needle nosed pliers. Then I took the timer knob and compression ring off of their shaft. With a clean cloth and some 409,I cleaned the area behind where the knob and ring came from.I replaced all of the parts and tested the machine. It worked properly on all cycles. Until I found your site,I was prepared to spend over $700.00 on a new washer,but thankfully your instructions helped me save some money. Thank you: O.Smith
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nathan from Prairieville, LA
Parts Used:
WH11X10049, WH01X10310, WH1X2117
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The washer knob was not engaging the timer when turned.
To remove the knob there is a small plastic clip holding it on. I pulled the knob out as far as it would normally go. Then I leaned over to look behind the knob and locate the clip. I used a small flat head screwdriver to push the clip off of the knob. I then pulled off the knob and dial compression ring. Inserted new compression ring fir st, then the knob. Installed new clip, being sure it secured the knob. That was all, very easy. The problem was cause by the plastic teeth on the knob had all broken off. This kept the knob from engaging the timer, and it would always spin freely.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
joe from toms river, NJ
Parts Used:
WH12X10350, WH11X10049, WH01X10310, WH1X2117
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
dial knob and timer gear stripped
Pulled washer away from wall, removed 2 screws, slide front panel to the right and lift up. Unclip both wire harnesses and remove screw, twist timer housing left and remove. Install new timer, and plug harnesses in, replace the front panel, after panel installed then install new dial knob and insert clip.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2

Model Compatibility

This part works with the following models:
Fix Number: FIX270835
Manufacturer Part Number: WH1X2117
Brand
Model Number
Description
General Electric
51140119
Washer
General Electric
51148119
Washer
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
52050119
Washer
General Electric
52120TAWB
Washer
General Electric
52140119
Washer
General Electric
52148119
Washer
General Electric
52150119
Washer
General Electric
52170119
Washer
General Electric
52170128
Washer
General Electric
52170129
Washer
General Electric
52178128
Washer
General Electric
52190116
Washer
General Electric
52190117
Washer
General Electric
52190118
Washer
General Electric
52190119
Washer
General Electric
52190129
Washer
General Electric
52198116
Washer
General Electric
52198117
Washer
General Electric
52198118
Washer
General Electric
52198119
Washer
General Electric
52198129
Washer
General Electric
53040116
Washer
General Electric
53040117
Washer
General Electric
53040118
Washer
General Electric
53040119
Washer
General Electric
53040129
Washer
General Electric
53048116
Washer
General Electric
53048117
Washer