Timer Knob with Clip

Replaced agitator coupling. First removed large white agitator assembly. It all came out in one piece. There is no bolt on the top that holds assembly onto shaft (as in most other washers). I pulled it out with my hands although it took significant force. The only hard part was removing the old agitator coupling. this was the hardest part ... Read more . I ended up breaking it into pieces to remove it. Then cleaned the shaft very well and installed the new Agitator Coupling. Replaced the Agitator assembly. Coupling kit fixed the problem.

I removed the old control knob and snapped th new vontrol knob into place. It tool less than one minute.

Took off clip and rest of broken knob. Pried out the spindle using a small headed flat screwdriver. Replaced the control knob and clip using the instructions provided. Basically, popped the knob back on securing it with the clip.

Part came quickly! Like 2 days time. Hubby is not mechanically incline but he fixed this! All he had to do was push this onto the metal rod.

Simply followed example on your website, slipped the knob on with clip in place, no problem.Best part of the process was speaking with a qualified representative and finding the right part the first time. Thank you.