GE/GE_Thumb/00122776i01.gif
See part 7 in the diagram
Replacing your General Electric Washer Dial with Compression Ring play video
( Grid squares measure 1x1 inch )

Dial with Compression Ring

$15.16
Fix Number: FIX1482363
Manufacturer #: WH11X10049
Manufactured by: GE

Product Description

This timer dial with compression ring is a genuine OEM part for your washer. The dial is made of plastic and is white in color. It can be found on the timer shaft underneath the timer knob, and it features an arrow to indicate how far along your laundry is in the wash cycle. If your timer dial has become cracked or damaged, it should be replaced. Please note that this part is different and sold separately from the timer knob.

Videos For installing this part.

Replacing your Dial with Compression Ring

Replacing your Dial with Compression Ring play video
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.2 / 5.0, 11 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Peter from CLIFTON, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Knob replacement
Unplugged washer. Using needle nose pliers removed old knobs and installed new ones. Your how to video was helpful.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Larry from Burlington, KY
  • Parts Used:
    WH11X10049
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Wrench set
Spins slowly
Replaced the belt. Did not fix. Replaced the fuse link. Did not fix. Replaced the lid switch. Did not fix. Went to Lows with one tool, MasterCard, and fix the problem by buying a new washing machine. Took 1/2 hour...
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Kevin from Tuscola, IL
  • Parts Used:
    WH11X10049, WH01X10310
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Push-pull knob on timer will not turn timer
After finding like model on line used pictures of parts on partselect.com to confirm parts needed and then ordered. On arrival in two days, removed old timer knob using pliers to remove clip, removed dial (with compression ring). Installed new dial and pushed on new timer knob (DON'T remove clip and try to install later) with clip in place. Clip will fall into place when installed. It took longer to find out which model family the washer was than anything.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    JACKIE from LAS VEGAS, NV
  • Parts Used:
    WH11X10049, WH01X10310
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
THE COMPRESSION RING BROKE
I DID EXACTLY WHAT I WAS INSTRUCTED TO DO ON THE SITE "YOU TUBE" VIDEO. WOW--IT WAS TOO EASY--THANKS
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob Stripped Out - Broke
Watched install video - snapped it on - problem fixed.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Mike from Malakoff, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Timer knob teeth worn off.could not select wash cycle.
First the exploded view provided in your website helped greatly I could see exactly what parts were involved. UPLUG WASHER ! 3 screws removed from back of control panel removed and the panel comes forward (hint..slide to right and it will detach from base making access easier) Pull knob out giving more room to remove plastic clip and knob comes off. 1 screw that holds timer in place removed and unplug the wiring harness. Reassemble using new parts in same manor as disassembly. Hint for putting clip on back of knob..place the clip partially on back of knob in the slot, put knob on shaft then using needle nose push the clip in place. Identifying and ordering parts here was a snap and saved me a bunch of money by not having to call a repair service. Thanks
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Orren from Brick, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Timer would not advance on any cycle.
I removed the timer knob clip with needle nosed pliers. Then I took the timer knob and compression ring off of their shaft. With a clean cloth and some 409,I cleaned the area behind where the knob and ring came from.I replaced all of the parts and tested the machine. It worked properly on all cycles. Until I found your site,I was prepared to spend over $700.00 on a new washer,but thankfully your instructions helped me save some money. Thank you: O.Smith
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Nathan from Prairieville, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
The washer knob was not engaging the timer when turned.
To remove the knob there is a small plastic clip holding it on. I pulled the knob out as far as it would normally go. Then I leaned over to look behind the knob and locate the clip. I used a small flat head screwdriver to push the clip off of the knob. I then pulled off the knob and dial compression ring. Inserted new compression ring first, then the knob. Installed new clip, being sure it secured the knob. That was all, very easy. The problem was cause by the plastic teeth on the knob had all broken off. This kept the knob from engaging the timer, and it would always spin freely.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dial knob and timer gear stripped
Pulled washer away from wall, removed 2 screws, slide front panel to the right and lift up. Unclip both wire harnesses and remove screw, twist timer housing left and remove. Install new timer, and plug harnesses in, replace the front panel, after panel installed then install new dial knob and insert clip.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    LOUIS from CORPUS CHRISTI, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
free wheeling timer knob
removed old timer knob clip by pushing out with small flat blade screw driver, gently used screw driver to pry stuck knob from timer stem, pulled out old dial indicator, . lubricated timer stem, inserted new dial indicator aligning with slot on timer stem, inserted new knob, inserted new timer knob clip and pushed in to lock with screw driver
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX1482363
Manufacturer Part Number: WH11X10049
Brand
Model Number
Description
General Electric
57731H0WW
Washer
General Electric
57731H2WW
Washer
General Electric
57731H3WW
Washer
General Electric
57731H5WW
Washer
General Electric
57731H6WW
Washer
General Electric
57731H7WW
Washer
General Electric
57731H8WW
Washer
General Electric
57731H9WW
Washer
General Electric
GBAN2800F0WW
Washer - WASHER
General Electric
GBSR3140H1WW
Washer
General Electric
GBSR3140H2WW
Washer
General Electric
GBSR3140H3WW
Washer
General Electric
GBSR3140H4WW
Washer
General Electric
GBSR3140H5WW
Washer
General Electric
GBSR3140H6WW
Washer
General Electric
GBSR3140H7WW
Washer
General Electric
GBSR3140H8WW
Washer
General Electric
GCAP1000M0WW
Washer
General Electric
GCAP1000M1WW
Washer
General Electric
GCAP1000M2WW
Washer
General Electric
GCAP1800D0WW
Washer
General Electric
GCAP1800D1WW
Washer
General Electric
GCSR2090H0WW
Washer
General Electric
GCSR2090H2WW
Washer
General Electric
GCSR2090H3WW
Washer
General Electric
GCSR2090H5WW
Washer
General Electric
GCSR2090H6WW
Washer
General Electric
GCSR2090H7WW
Washer
General Electric
GCSR2090H8WW
Washer
General Electric
GCSR2090H9WW
Washer