OEM Royal Upright Vacuum Parts & Accessories

Roller Lifter Assembly

$13.02

Fix Number: FIX10518381
Manufacturer Part Number: H-440001693

It is an authentic manufacturer-supplied item that is designed for use with Hoover and Royal vacuums. This is an identical replacement for a missing or a damaged roller lifter assembly that was installed on a new equipment. It is the component which supports the unit allowing for easy movement. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. The roller lifter assembly is made of durable materials and is sold as an individual item. A screwdriver will be needed to remove and secure the hardware the holds this assembly.

Style 10 Belt

$5.95

★★★★★

1 Review

Fix Number: FIX10334638
Manufacturer Part Number: RO-860140P

These are genuine manufacturer sourced replacement belts used on upright vacuums. It helps to drive the brushroll assembly. These belts are made out of rubber. Includes two (2) belts per order. It is recommended to replace these belts every 6 months to ensure optimum performance. You would need a screwdriver to complete a repair. • First remove nozzle guard • Slide belt off motor shaft • Lift and remove brushroll • Dispose of old belt • Place belt on motor shaft, then slip brushroll through belt • With belt in place, pull and slide brushroll into nozzle • Reattach nozzle guard

Flat Vacuum Belt (style 4 Or 5

$9.22

Fix Number: FIX10334544
Manufacturer Part Number: RO-540310

This is a genuine Dirt Devil upright vacuum belt. It fits vacuums that use a Style 4 or Style 5 belt. This is a flat belt which is used to transfer motion from the drive shaft to the brushroll. Th brushroll spins inside the suction nozzle in order to agitate the fibers of carpet or upholstery. This loosens dirt for a thorough clean. Note that the old belt may seem larger then the replacement belt because they get stretched out over time. One belt is included per package.

Fan / Slip On

$23.45

Fix Number: FIX10473190
Manufacturer Part Number: RO-608005

Belt - 2 Pack

$6.00

Fix Number: FIX12052113
Manufacturer Part Number: RO-AR20060

These belts are authentic OEM replacement parts. They are designed for use with one model of Royal vacuum. These flat belts help drive the rotating brush. Two belts are included per package. They are made of rubber and should be replaced regularly. A screwdriver is needed to remove the plate concealing this part.

Hepa Filter Assembly

$23.44

Fix Number: FIX10334734
Manufacturer Part Number: RO-JC0280

This is a Genuine OEM Sourced replacement part designed for use with Upright Vacuums. This Filter helps to keep the air clean. This part is made out of Plastic and Paper and it is Sold Individually. No tools are required to replace this Filter. You can simply remove the old filter from the vacuum cleaner and replace it with the new one. Designed according to strict HEPA standards, the media in this filter trap particles 75 times smaller than a human hair, including 99.97% of dust mite debris, animal dander, molds and pollen down to 0.3 microns.

Style 5 Belt

$6.73

Fix Number: FIX17016322
Manufacturer Part Number: RO-720310

This is a genuine manufacturer sourced replacement tyle 5 drive belt used on Dirt Devil and Royal upright vacuums. It is used to drive the brush roll assembly. This belt is made out of rubber material and it is sold individually. Over time belts will wear out and stretch requiring replacement. It is recommended to replace these belts every 6 months to ensure optimum performance. Replacing a belt of an upright vacuum is a simple and quick task that should only require a screwdriver. • Ensure the vacuum is unplugged • First remove the bottom plate • Slide the belt off the motor shaft • Lift and remove the brush roll • Remove the old belt • Place the new belt on the motor shaft • Slide the brush roll through the belt • With belt in place, pull and slide brush roll into nozzle • Secure the bottom plate • Reattach nozzle guard

Style 21 Belt

$5.95

Fix Number: FIX10473259
Manufacturer Part Number: RO-PD0034

This is a genuine Royal replacement part that is sourced from the original manufacturer to ensure quality. The belt is used to link the motor drive shaft and the brush roll assembly. This item allows the motor and brushroll to rotate in unison. This part is sold as an individual replacement part.

Wheel Retainer Cap

$5.95

Fix Number: FIX10473218
Manufacturer Part Number: RO-801711

This is a high-quality component which is made for Dirt Devil and Royal vacuums. It is supplied from the original equipment manufacturer. The cap is utilized to secure the wheel on the axle. If the cap is damaged or missing, this part will provide an identical replacement. Make sure to check the diagrams for your specific model for the correct installation of the new component. This high-quality wheel retainer cap is made of durable material and is sold as an individual item. Replacing it is a simple task that should only require pliers.

Belt Lifter

$8.07

Fix Number: FIX10334665
Manufacturer Part Number: RO-880262

This belt lifter is an OEM part direct from the original manufacturer for use with Dirt Devil and Royal hand vacuums. This belt lifter is used to adjust the belt on the brush roll and motor shaft. This part is made of black plastic and is sold as an individual replacement part.

Royal Upright Vacuum Parts

Popular Royal Upright Vacuum Parts

Royal Upright Vacuum Appliance Types

Related Royal Upright Vacuum Parts

Popular Royal Upright Vacuum Models

Royal Upright Vacuum Parts

Start With Your Model Number

Popular Royal Upright Vacuum Parts

Royal Upright Vacuum Appliance Types

Related Royal Upright Vacuum Parts

Popular Royal Upright Vacuum Models