Royal Upright Vacuum Belts

Royal Appliance Parts

Popular Royal Upright Vacuum Belts

Style 21 Belt
$4.15
In Stock
Fix Number
FIX10473259
Manufacturer Part Number
RO-PD0034
This is a genuine Royal replacement part that is sourced from the original manufacturer to ensure quality. The belt is used to link the motor drive shaft and the brush roll assembly. This item allows the motor and brushroll to rotate in unison. This part is sold as an individual replacement part.
Belt - 2 Pack
$6.00
In Stock
Fix Number
FIX12052113
Manufacturer Part Number
RO-AR20060
These belts are authentic OEM replacement parts. They are designed for use with one model of Royal vacuum. These flat belts help drive the rotating brush. Two belts are included per package. They are made of rubber and should be replaced regularly. A screwdriver is needed to remove the plate concealing this part.
Style 10 Belt
$5.79
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX10334638
Manufacturer Part Number
RO-860140P
These are genuine manufacturer sourced replacement belts used on upright vacuums. It helps to drive the brushroll assembly. These belts are made out of rubber. Includes two (2) belts per order. It is recommended to replace these belts every 6 months to ensure optimum performance. You would need a screwdriver to complete a repair. • First remove nozzle guard • Slide belt off motor shaft • Lift and remove brushroll • Dispose of old belt • Place belt on motor shaft, then slip brushroll through belt • With belt in place, pull and slide brushroll into nozzle • Reattach nozzle guard
Style 5 Belt
$6.73
In Stock
Fix Number
FIX17016322
Manufacturer Part Number
RO-720310
This is a genuine manufacturer sourced replacement tyle 5 drive belt used on Dirt Devil and Royal upright vacuums. It is used to drive the brush roll assembly. This belt is made out of rubber material and it is sold individually. Over time belts will wear out and stretch requiring replacement. It is recommended to replace these belts every 6 months to ensure optimum performance. Replacing a belt of an upright vacuum is a simple and quick task that should only require a screwdriver. • Ensure the vacuum is unplugged • First remove the bottom plate • Slide the belt off the motor shaft • Lift and remove the brush roll • Remove the old belt • Place the new belt on the motor shaft • Slide the brush roll through the belt • With belt in place, pull and slide brush roll into nozzle • Secure the bottom plate • Reattach nozzle guard
Belt
$4.15
Special Order
Fix Number
FIX10473206
Manufacturer Part Number
RO-672260
This is a belt for your vacuum. It rotates the brush roll assembly that is used to collect dust, hair, and other small debris. The belt is located and installed in various places, depending on your model. Because it is constantly working when your vacuum is running, the belt is a commonly replaced part. It is sold individually, however, we recommend buy two at once to keep an extra on hand.
Belt
$5.40
Special Order
Fix Number
FIX12067516
Manufacturer Part Number
H-44783
This is a genuine OEM sourced replacement belt specially designed for use with Hoover and Royal vacuums. It is the main belt that drives the brushroller. Over time these rubber belts tend to wear out and stretch requiring replacement. It is advised to replace this belt every 6 months to ensure optimum performance. Please note, this item is sold individually.
Flat Vacuum Belt (style 4 Or 5
$8.50
In Stock
Fix Number
FIX10334544
Manufacturer Part Number
RO-540310
This is a genuine Dirt Devil upright vacuum belt. It fits vacuums that use a Style 4 or Style 5 belt. This is a flat belt which is used to transfer motion from the drive shaft to the brushroll. Th brushroll spins inside the suction nozzle in order to agitate the fibers of carpet or upholstery. This loosens dirt for a thorough clean. Note that the old belt may seem larger then the replacement belt because they get stretched out over time. One belt is included per package.
Belt Lifter
$8.07
In Stock
Fix Number
FIX10334665
Manufacturer Part Number
RO-880262
This belt lifter is an OEM part direct from the original manufacturer for use with Dirt Devil and Royal hand vacuums. This belt lifter is used to adjust the belt on the brush roll and motor shaft. This part is made of black plastic and is sold as an individual replacement part.
Style 12 Belt / 2 Pack
$7.88
In Stock
Fix Number
FIX10334680
Manufacturer Part Number
RO-910355
These belts are genuine replacement parts manufactured for use with Dirt Devil vacuums. Overtime belts can wear out causing a reduction in performance and can even break preventing the vacuum's brushroll to stop spinning. It is recommended to replace the belt every three to six months to maintain the vacuum's performance. This two pack of belts are sold as an individual replacement part.
Belt Actuator Lever
$5.20
Special Order
Fix Number
FIX10472373
Manufacturer Part Number
1PD0315000

Related Royal Upright Vacuum Parts