OEM Bissell Carpet Cleaner Parts & Accessories

Silicone Tube 7.9 Mm Od, 4.9 M

$11.96

Fix Number: FIX10271492
Manufacturer Part Number: B-203-6818

This is an original Bissell replacement part. The silicone tube is designed by the manufacturer for use in carpet cleaners. This part is use to carry water or cleaning solution through the machine. Because there are multiple similar tubes in the machine, it is advisable to label the tubes with the places they connect, or to take a picture, before removing these parts for replacement. The silicone tube is sold individually.

Cap And Insert Assy

$7.03

Fix Number: FIX10271196
Manufacturer Part Number: B-203-5014

This is an original Bissell part. This part is used on many models of Bissell carpet cleaners. The Cap And Insert Assembly is used on the Clean Tank Assembly. The Cap allows for easy flow of clean water and cleaning solution. This part should be replaced if it leaks or becomes damaged in other ways. This part requires no tools to replace.

Right Side Geared Belt

$7.89

Fix Number: FIX10271479
Manufacturer Part Number: B-203-6804

Genuine Bissell supplied replacement part for a variety of Carpet Cleaners. This item is sold individually. When replacing Right Belt it is recommended to replace the Left Belt as well for best operation. The belts should be checked periodically. If belts are worn or stretched they need to be replaced to provide best performance.

Brush-stationary

$5.98

Fix Number: FIX10271228
Manufacturer Part Number: B-203-5545

This is a genuine item that is supplied by the original equipment manufacturer for Bissell carpet cleaners. It is an identical replacement for a missing or a faulty stationary-brush that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality brush is made of durable plastic and is sold individually.

Pivot Arm Retainer Assembly

$4.15

★★★★★

1 Review

Fix Number: FIX10272369
Manufacturer Part Number: B-555-9113

This authentic OEM retainer assembly secures the left and right pivot arms of the brush roll assembly on your steam vacuum. The pivot arms allow the brushes to move and adjust to various surfaces for effective cleaning, and the retainer assembly ensures they stay in place during operation. The assembly comes with the necessary hardware for replacement and is typically located on the sides of the front base, beneath the plastic base window. If you notice that the pivot arms are loose or worn out, it is time to replace the assembly. To remove it, refer to your user manual to locate and access it at the base of your vacuum. Unthread the mounting screws and remove the old assembly from its housing, then proceed with installing the new assembly. Please remember that this includes both the left and right pivot arm retainers along with the necessary fasteners for installation.

Autoload Gasket

$5.20

Fix Number: FIX10271380
Manufacturer Part Number: B-203-6679

The autoload gasket is made out of rubber and attaches to the tank. This part is available as an individual replacement. This authentic item is supplied directly from the original equipment manufacturer for use with carpet cleaners by Bissell. No tools should be needed during the replacement of this part. It may become broken and will need to be replaced.

Tank Filter

$5.20

Fix Number: FIX10270260
Manufacturer Part Number: B-203-0105

It is an authentic manufacturer-sourced replacement part which is specially designed for use with Bissell Carpet Cleaners. This filter is specifically designed to collect any lint that is sucked up with the cleaner and prevents it from entering the solution tank. It is recommended that this is cleaned out after every use. This is made of a plastic material and is sold separately.

Solenoid Valve

$14.32

Fix Number: FIX10271453
Manufacturer Part Number: B-203-6761

This is an original Bissell part. This Solenoid Valve is used in many models of Bissell Carpet Cleaners. When powered, this valve allows the flow of water at the press of a button or the pull of a trigger. This part should be replaced when water will not flow or when it won't stop flowing. When replacing the Valve, double check the condition of the Tubing (part number B-203-6819) making sure that it is free of cracks and splits. Tools Used: • Philips Screw Driver • Needle Nose Pliers

Flow Indicator Assembly

$11.96

Fix Number: FIX10271761
Manufacturer Part Number: B-203-7439

This is an authentic Bissell replacement part. The flow indicator assembly is designed by the manufacturer for use in carpet cleaners. This part is made primarily of high-quality plastic, and is placed in the housing to monitor the flow of liquid through the machine. This item is supplied as an individual replacement part.

Foot Motor Assembly

$75.73

Fix Number: FIX10271754
Manufacturer Part Number: B-203-7431

Bissell Carpet Cleaner Parts

Popular Bissell Carpet Cleaner Parts

Bissell Carpet Cleaner Appliance Types

Related Bissell Carpet Cleaner Parts

Popular Bissell Carpet Cleaner Models

Bissell Carpet Cleaner Parts

Start With Your Model Number

Popular Bissell Carpet Cleaner Parts

Bissell Carpet Cleaner Appliance Types

Related Bissell Carpet Cleaner Parts

Popular Bissell Carpet Cleaner Models