Bissell Carpet Cleaner Belts

Fix Number

FIX10271388

Manufacturer Part Number

B-203-6688

This is a Genuine Bissell geared Motor belt, it is sold individually. When replacing Left Belt it is recommended to replace the Right Belt part #B-203-6804 as well for best operation. The belts on vacuum should be checked periodically. If belts are worn or stretched they need to be replaced to avoid potential damage to the unit.

Fix Number

FIX10271479

Manufacturer Part Number

B-203-6804

Genuine Bissell supplied replacement part for a variety of Carpet Cleaners. This item is sold individually. When replacing Right Belt it is recommended to replace the Left Belt as well for best operation. The belts should be checked periodically. If belts are worn or stretched they need to be replaced to provide best performance.

Fix Number

FIX10270195

Manufacturer Part Number

B-160-1961

This is an authentic Bissell replacement part manufactured for use with upright vacuums and carpet cleaners. The belt is used as an actuator between the motor and brush roll. The belt drives the brush in a spinning motion to help lift dirt into the vacuum. Belts do wear out over time from normal use and need to be replaced occasionally. This belt is sold individually.

Fix Number

FIX10269744

Manufacturer Part Number

B-010-0620

Genuine Bissell replacement part,this item is sold individually. This belt is driven by the motor to operate the Pump Assembly for the models listed below. Overtime the Belt will wear and stretch, causing the pump to not work properly. It is advised to get an extra belt to keep on hand.

Fix Number

FIX10270230

Manufacturer Part Number

B-160-2669

This is an authentic replacement part manufactured for use with deep clean pet carpet cleaners. This cogged belt is the drive belt that links the motor and the brush roller. The belt is on the left side of the brush rollers and the belt is sold as an individual replacement part.

Fix Number

FIX10270181

Manufacturer Part Number

B-160-1542

This is an authentic replacement part manufactured for use with Bissell carpet cleaners. The cogged belt is used to drive the brush roll to aid in lifting dirt from carpet. This brush belt is sold as an individually, please see model diagram for associative parts.

Fix Number

FIX10270182

Manufacturer Part Number

B-160-1543

A genuine item that is supplied by the original equipment manufacturer for use with Bissell cleaners. It is an identical replacement for a missing or damaged pump belt which originally was installed on the new unit. Keep in mind this high-quality component is made of durable rubber and is sold individually, over time the material may stretch and begin to crack eventually requiring a replacement.

Fix Number

FIX10271123

Manufacturer Part Number

B-203-2537

This is an authentic Bissell replacement part sourced directly from the manufacturer. The belt is found in a Bissell carpet cleaner. This part is made of flexible rubber and is used to drive the brush cartridge. You may require a screwdriver when replacing this item. This is a common wear item. We recommend ordering a spare. This part is old individually.

Fix Number

FIX10272518

Manufacturer Part Number

BR-1020

A genuine item which is supplied directly from the original equipment manufacturer for use with Bissell carpet cleaners. It is an identical replacement for a worn or missing pump belt which was originally installed on a new unit. Keep in mind this high-quality component is made of durable rubber material and is sold individually. Make sure to check the appropriate diagrams of your model for the correct location and application of this hardware.

Fix Number

FIX10272519

Manufacturer Part Number

BR-1075

This is a genuine Bissell part used with carpet cleaners. This belt fits onto the motor drive shaft and around the brushroll. This geared belt has notches that are designed to fit into sprockets on the brushroll, providing efficient transfer of motion. These parts are made to be replaced every one to two years. This belt is sold individually.