Carpet Cleaner Parts

Belt, Timing

$27.44

Fix Number: FIX10342153
Manufacturer Part Number: L00779

This is an original replacement part sourced directly from the manufacturer. The timing belt is found in self contained extractors from EDIC. This part is made of flexible rubber, and is used to transfer power from the motor pulley to the brush roll. Over time it may become brittle and cracked, and need replacement.You may require a wrench when replacing this item. The timing belt is sold as an individual replacement part.

Solenoid Valve

$14.32

Fix Number: FIX10271453
Manufacturer Part Number: B-203-6761

This is an original Bissell part. This Solenoid Valve is used in many models of Bissell Carpet Cleaners. When powered, this valve allows the flow of water at the press of a button or the pull of a trigger. This part should be replaced when water will not flow or when it won't stop flowing. When replacing the Valve, double check the condition of the Tubing (part number B-203-6819) making sure that it is free of cracks and splits. Tools Used: • Philips Screw Driver • Needle Nose Pliers

Left & Right Elevator Lever

$9.72

Fix Number: FIX10270241
Manufacturer Part Number: B-200-0010

These are the right and left elevator levers for a variety of vacuum models. These levers are responsible for adjusting the height of the vacuum and its brush to suit different floor types, levels, and cleaning requirements. Crafted from high-quality OEM plastic, this pair of levers is sold individually and includes two levers and necessary springs. As these levers are made of plastic, they can break under excessive stress, use, or when clogged with dirt and debris. If broken, noticeable signs include difficulty in raising or lowering the vacuum, being stuck in place, or failure to pick up dirt effectively. To replace these levers, a Philips-head and flat-head screwdriver are all that is needed. Begin by carefully disassembling your vacuum, unscrewing the screws around the chassis, and removing the top to access its interior. Once the top portion is removed, unscrew and remove the motor cover or any obstructing part that blocks access to the lever(s). If necessary, remove the carry handle and/or brush roll to access the levers. The levers are located on each side of the vacuum interior and can be carefully removed by prying them out with a flathead screwdriver. Replace the levers, then reassemble the top portion, carry handle, and brush roll of the vacuum.

Body Receiver Assembly

$7.04

Fix Number: FIX10271899
Manufacturer Part Number: B-203-7912

Filter Assy, In-line

$5.95

Fix Number: FIX10271887
Manufacturer Part Number: B-203-7898

On/off Switch

$5.99

Fix Number: FIX10271758
Manufacturer Part Number: B-203-7435

Wheel Retainer Cap

$5.95

Fix Number: FIX10473218
Manufacturer Part Number: RO-801711

This is a high-quality component which is made for Dirt Devil and Royal vacuums. It is supplied from the original equipment manufacturer. The cap is utilized to secure the wheel on the axle. If the cap is damaged or missing, this part will provide an identical replacement. Make sure to check the diagrams for your specific model for the correct installation of the new component. This high-quality wheel retainer cap is made of durable material and is sold as an individual item. Replacing it is a simple task that should only require pliers.

Belt Pack

$7.81

Fix Number: FIX10334598
Manufacturer Part Number: RO-720310P

Genuine Dirt Devil Style 4/5 Belt fits all Featherlite Uprights that use paper bags, all Swivel Glide Uprights that use paper bags, and all Dirt Devil Vision Uprights. Replace your belts every 3 to 6 months.

Pivot Arm Retainer Assembly

$5.95

★★★★★

1 Review

Fix Number: FIX10272369
Manufacturer Part Number: B-555-9113

This authentic OEM retainer assembly secures the left and right pivot arms of the brush roll assembly on your steam vacuum. The pivot arms allow the brushes to move and adjust to various surfaces for effective cleaning, and the retainer assembly ensures they stay in place during operation. The assembly comes with the necessary hardware for replacement and is typically located on the sides of the front base, beneath the plastic base window. If you notice that the pivot arms are loose or worn out, it is time to replace the assembly. To remove it, refer to your user manual to locate and access it at the base of your vacuum. Unthread the mounting screws and remove the old assembly from its housing, then proceed with installing the new assembly. Please remember that this includes both the left and right pivot arm retainers along with the necessary fasteners for installation.

Autoload Gasket

$5.95

Fix Number: FIX10271380
Manufacturer Part Number: B-203-6679

The autoload gasket is made out of rubber and attaches to the tank. This part is available as an individual replacement. This authentic item is supplied directly from the original equipment manufacturer for use with carpet cleaners by Bissell. No tools should be needed during the replacement of this part. It may become broken and will need to be replaced.

Popular Carpet Cleaner Parts

Carpet Cleaner Brands

Related Carpet Cleaner Parts

Popular Carpet Cleaner Models

Carpet Cleaner Parts

Start With Your Model Number

Popular Carpet Cleaner Parts

Carpet Cleaner Brands

Related Carpet Cleaner Parts

Popular Carpet Cleaner Models