Clipper Trimmer Parts

Popular Clipper Trimmer Parts

Ac Cord
$13.07
In Stock
Fix Number
FIX10427725
Manufacturer Part Number
482232110344
This is a genuine Norelco replacement part for use with electric shavers/razors, this is not an aftermarket imitation part. This part is used to charge the internal batteries of the shaver/razor, the black coil cord is sold individually.
Switch Button
$5.95
In Stock
Fix Number
FIX17016561
Manufacturer Part Number
69136
This is an authentic replacement part manufactured for Andis clippers. This molded rubber switch button is the cover seen from the side of the clipper, when pressed the button engages the circuit board. Overtime the switch button can wear exposing the circuit board, it is recommended to replace worn switch buttons. The switch button is sold individually, and the circuit board is available separately.
1/2" (12mm) Guide Comb
$6.51
Special Order
Fix Number
FIX10469799
Manufacturer Part Number
RP00158
Switch Assy-ml/gc-service
$5.95
In Stock
Fix Number
FIX12006211
Manufacturer Part Number
01767
This is a genuine high quality switch assembly that is sourced directly from original equipment manufacturer for use with Andis clippers. It is the part of the tool that allows user to turn the unit on and off. Over time mechanical switches will wear out and may begin to fail eventually requiring replacement. Replacing it is a simple task that should only require a screwdriver. One durable plastic switch with two lead wires attached is included per order.

Installation Instructions

petter from P C BEACH, FL
good
good Read more...
Cord
$17.32
In Stock
Fix Number
FIX10469709
Manufacturer Part Number
RP00043
This is a genuine manufacturer-sourced part which is specially designed for use with Remington beard trimmers. This cord is a charger for your beard trimmer to give it power so it can be used. No tools are needed to install, just simply push the end section of the charger into place on the trimmer and plug it into an outlet. This part is made of plastic, with electric wires, and is sold individually.
1/8" (3mm) Guide Comb
$6.51
On Order
Fix Number
FIX10469767
Manufacturer Part Number
RP00124
This is a replacement part sourced directly from the manufacturer for Remington haircut kits. The 1/8 (3mm) Guide Comb helps with guiding to make sure that hair is cut at an even length. This part is approximately 2 inches wide. No tools are needed for repairing or installing, simply just push the part in place. This part is made of plastic and is sold individually.
Tension Spring Assembly
$5.95
In Stock
Fix Number
FIX12164188
Manufacturer Part Number
201394
This part comes directly from Andis. This Tension Spring is used in multiple models of Andis hair trimmers. The Spring is made of metal and includes the nylon tip. The Spring holds tension on the cutter of the blade. If the blade doesn't move, then this part should be replaced. This part is commonly purchased with the Tension Screw (part number 32527) and the Retaining Screws (29752). Tools Used: • Flat Head Screw Drivers • Philips Head Screw Driver
Left Ear Guide Comb
$6.51
Special Order
Fix Number
FIX10469803
Manufacturer Part Number
RP00163
Link
$5.37
Special Order
Fix Number
FIX17016507
Manufacturer Part Number
45515000000
This is an OEM part from Oster Pro. This Link is used in many models of Oster Pro clippers. The Link is made of metal and has a post at one and a large hole in the other. This link helps drive the blades for cutting hair. The large hole sits on top of the Gear (part number 058908-000-000). The post then connects to the Lever (044946-005-000). This part will need to be lubricated when installed. Use the Clipper Grease (076300-105-005) to create a thin film anywhere there is a friction surface.
1/4" (6mm) Guide Comb (sna
$6.51
In Stock
Fix Number
FIX10469797
Manufacturer Part Number
RP00156
This is an OEM part sourced directly from the manufacturer. The guide comb is designed for use in haircut kits. This part is made of high-quality plastic, and is an optional attachment that can be snapped onto the end of the clipper to provide an even cut length. No tools are required when replacing this part. This item is sold individually.

Clipper Trimmer Brands

Popular Clipper Trimmer Models