Iron Parts

Watch the install video

Light Bulb - 10W

$16.32

★★★★★

1 Review

Fix Number: FIX11739347
Manufacturer Part Number: WP22002263

This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.

Installation Instructions

David from Myrtle Beach, SC

Dryer would squeek loudly

Removed door, and front bezel. Write the colors of the wires next to the door switch and the moisture sensor on the bezel so that you can remove the wires, this makes it easier. Lifted top up and pulled drum out, but did not remove belt. Inspected wheels and roller shaft. Needed to replace (2) Roller Wheels, (1) Roller Shaft, (2) Retaining Rings, & (2) Shaft Washers. Ordered parts from the site. Removed the Retaining rings. The retaining ring tool I bought from the hardware store did not fit the holes in the retaining ring, so I had to file the tips down. Once the retaining rings are removed, the washers and rollers come off easily. The Roller Shaft can be removed by loosening the nut on the back side of the shaft. Inserted new shaft and tightened nut, then replaced both rollers, and washers, and reinstalled the Retaining rings. Put drum back in place, tied all wires back in and reinstalled front bezel and door. Read more...

Cord / Power Supply

$14.78

★★★★★

2 Reviews

Fix Number: FIX10406227
Manufacturer Part Number: RS-DW0201

This is an authentic OEM replacement part for select models of Rowenta Irons. To see if this is compatible with your Iron, please see the "Model Cross Reference List" below. This part includes the Power Cord, the Control Board, and the Strain Relief. This part is responsible for providing electricity to your Iron. This part should be replaced if your Iron will not turn on, if there is a short in the cord, if the cord is damaged, or if the auto shut off feature does not function properly. This part may also be called a Cord/Power Assembly and is sold individually.