Models
>
DW5080U1
DW5080U1 Rowenta Iron
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DW5080U1
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
In Stock
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
September 5, 2022
Will not heat up, possible problem??
For model number DW5080U1
Hello Robert, Thank you for your inquiry. Many Rowenta irons have an automatic shut-off feature that turns the iron off if it sits too long. It's possible that while you were carefully positioning a garment on the ironing board, your iron turned itself off. To correct the problem, simply pick up your iron and give it a little shake. It should light up and come right back on. If it doesn't, try turning up the iron's heat setting. If all else fails, plug the iron into a different electrical outlet. If that does not fix the issue, try replacing the steam valve, the handle front and pump, or the power cord. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Elizabeth
March 15, 2025
How do I get the back plate off? Will the power cord work for DW5080?
For model number DW5080U1
Hello Elizabeth, thank you for your question. Look for a single torx-style screw. Once that screw is removed, the back plate should gently pop off by prying on the edges. The correct power cord is FIX12051843. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- GENE from NEW BRAUNFELS, TX
- Parts Used:
- RS-DW0128
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Unit would cycle on/off but defaulted to off frequently
Unplug unit from a power supply. There is only one screw at the base/rest of the iron. Remove that screw. Then gently pry off that plastic base cap. Once removed, the wiring is exposed. Simply pull back on the harness portion that drops down into the handle. Secondly, the plug-in portion of the harness inside the base cavit
... Read more
y has two flat clips that "catch" the wiring from being pulled out of the handle. Simply take a small flat bladed screwdriver and slightly lift those two flat "catches". That will release the rest of the wire harness. Discard this wire harness and prepare to install the new one. First, slide the long wire portion down into the handle cavity until it stops. Second, press the other wire harness portion over it's two clips until you hear/sense that the two flat "catches" have secured this portion of the harness. Reattach base and secure with the screw you previously removed. Plug in and test by looking for Power-On light.
Read less
Was this instruction helpful to you?
Thank you for voting!