Espresso Machine Parts

Popular Espresso Machine Parts

Tank Water Assembly
$28.79
In Stock
Fix Number
FIX17585898
Manufacturer Part Number
SP0100209
This water tank assembly is a durable, high-quality reservoir designed for select espresso machines, providing a secure and reliable source of water for brewing. Made from sturdy plastic, it ensures long-lasting performance and maintains the original fit and functionality of your appliance. The tank is easy to install—simply remove the old reservoir and slide the new one into place—making it a quick DIY solution to keep your coffee machine operating at its best.
Grind Fan Assembly
$10.96
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX12008191
Manufacturer Part Number
SP0001576
This grind fan assembly circulates air within the unit to support cooling and consistent grinding performance. Designed for quiet, efficient operation, it is replaced when airflow decreases, overheating occurs, or abnormal noise develops during use.
Inner Burr Assembly
$30.24
Special Order
★★★★★
★★★★★
1 Review
Fix Number
FIX17828518
Manufacturer Part Number
SP0008611
O-ring For Hose Connector
$6.55
In Stock
Fix Number
FIX12008219
Manufacturer Part Number
SP0001672
Designed for use with Breville Dual Boiler Espresso Machines, this OEM replacement part can be used to replace a faulty or damaged O-Ring. To ensure this part will fit your device, please see the "Model Cross Reference List" below. The O-Ring is responsible for maintaining high pressure between rigid parts by creating an airtight seal. A damaged or worn O-Ring can result in leaks, which could cause damage to other components. Consequently, the manufacturer recommends frequently checking your seals. This part is made of flexible rubber and is sold individually.
Two Cup Dual Wall Filter
$21.05
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX12008161
Manufacturer Part Number
SP0001521
This is a genuine two cup dual wall 54mm filter for an espresso machine This dual wall filter basket is made of stainless steel and sold as an independent product. Please note that the one cup version is sold separately. The dual wall filter basket controls the pressure and helps to enhance the extraction, no matter what the grind, dose, tamp pressure or freshness. This type of filter should only be used with pre-ground coffee.
Bean Hopper
$28.79
In Stock
Fix Number
FIX12008187
Manufacturer Part Number
SP0001570
This is an authentic OEM part. This high-quality plastic bean hopper is used to store and dispense coffee beans in Breville's Barista Express espresso machine. To replace this item simply remove the current hopper and insert the new one into the space on the top of the unit. Rotate to lock into place by turning clockwise. This item is sold individually.
Generator Gasket - Orange
$7.69
In Stock
Fix Number
FIX10311182
Manufacturer Part Number
5332149100
This generator gasket is an OEM quality part that is used to seal the filter to the generator of your coffee maker. If this part is cracked, torn, stretched, or otherwise damaged, it should be replaced. It is made of silicone, is orange in color, has an outside diameter of 43.6mm, inside diameter of 35.2mm, and a thickness of 4.2mm (these measurements are approximate). Sold separately.
Felt Washer
$12.55
In Stock
★★★★★
★★★★★
5 Reviews
Fix Number
FIX12008190
Manufacturer Part Number
SP0001575
This part is an OEM approved replacement part for Breville Espresso Machines, to ensure this is compatible with your machine, please see the "Model Cross Reference List" below. The Felt Washer is designed to distribute the pressure across the surface of connected parts evenly. If you notice unusual noises or vibrations from your machine, it may be time to replace the Felt Washer. This part measures approximately 1"L x 0.5" W, and is sold individually.

Installation Instructions

Monty from BEAVERTON, OR
Original felt washer tore when cleaning the grinder
Simply followed the instructions in the Breville BES870XL instruction book for Advanced cleaning and reassembling the grinder (pg 26). I did need to use needle nosed pliers to remove the grind fan (fig 7) on bottom of the page Reassembly was easy. Read more...
Shower Head Steam Ring
$10.96
In Stock
Fix Number
FIX17016383
Manufacturer Part Number
SP0025526
This is an authentic OEM replacement part that has been sourced directly from the manufacturer. This part is compatible with Breville Infuser and Barista Espresso Machines. For full compatibility, please see the "Model Cross Reference List". The Steam Ring ensures an airtight seal to prevent hot water or steam from leaking between the Thermal Block Assembly and the Filter Holder Assembly. If your machine is leaking hot water or steam, it may be time to replace the Steam Ring, which tends to lose its ability to hold an airtight seal over time. This part is 2.5" in diameter, and is made of rubber. This product is also referred to as an O-Ring and a Silicone Gasket. Rings are sold individually, but due to the tendency to wear out over time, you may want to consider buying a spare.
Fixes these symptoms

Installation Instructions

Andy from BINGHAMTON, NY
Over time and thousands of uses, the grinding of the portafilter against the gasket causes the gasket to deteriorate and the seal to go bad.
A single hex screw secures the assembly. Remove it, pull off the upper filter, pry out the old gasket, swap in the new one, set the upper filter back in place, and secure it with that same screw. Read more...
Ntc Base Assembly From Pdc2315
$38.68
In Stock
Fix Number
FIX17831580
Manufacturer Part Number
SP0102952
Fixes these symptoms
  • Controls / buttons don't work right
  • Won't turn on
  • See more...

Espresso Machine Brands

Related Espresso Machine Parts

Popular Espresso Machine Models