Espresso Machine Seals and Gaskets

Fix Number

FIX12008219

Manufacturer Part Number

SP0001672

Designed for use with Breville Dual Boiler Espresso Machines, this OEM replacement part can be used to replace a faulty or damaged O-Ring. To ensure this part will fit your device, please see the "Model Cross Reference List" below. The O-Ring is responsible for maintaining high pressure between rigid parts by creating an airtight seal. A damaged or worn O-Ring can result in leaks, which could cause damage to other components. Consequently, the manufacturer recommends frequently checking your seals. This part is made of flexible rubber and is sold individually.

Fix Number

FIX10311182

Manufacturer Part Number

5332149100

This generator gasket is an OEM quality part that is used to seal the filter to the generator of your coffee maker. If this part is cracked, torn, stretched, or otherwise damaged, it should be replaced. It is made of silicone, is orange in color, has an outside diameter of 43.6mm, inside diameter of 35.2mm, and a thickness of 4.2mm (these measurements are approximate). Sold separately.

Fix Number

FIX10310752

Manufacturer Part Number

5313217701

This is a single O-ring for a coffeemaker/espresso machine. It measures approximately 5/16-inches in outer diameter and has a 3/16-inch inner diameter. This O-ring attaches to the tube, which is connected to the upper boiler. It acts as a water-tight seal to prevent liquid from leaking between these two connected parts. Due to the high temperature and wet conditions, this rubber O-ring is subject to wear and may require replacement.

Fix Number

FIX10310753

Manufacturer Part Number

5313217751

This is one black rubber O-ring for coffee makers and espresso machines. This O-ring is compatible with various products, however serves the same function. It creates a seal to keep liquids from leaking from the appliance. If your appliance begins to leak, you will want to inspect this O-ring for cracks or breakage.

Fix Number

FIX12020061

Manufacturer Part Number

7313285849

This is a genuine Delonghi product. This Gasket is used on many models of Delonghi espresso makers. The Gasket is made of a high temp silicone and is used to create a seal between the diffuser and the filters. If water, steam, or coffee leaks out of the filter while brewing then this part should be replaced. To replace this Gasket first remove the diffuser by removing the screw. Then, gently pull the old gasket off. Clean the area with a damp cloth. Install the new Gasket and reinstall the diffuser.

Fix Number

FIX10310766

Manufacturer Part Number

5313220031

This part comes directly from Delonghi. This O-Ring is used in multiple models of Delonghi coffee makers. The O-Ring is made from a high temp silicone. This O-Ring is used to seal steam, water, and frothed milk depending on the model it is installed in. The O-Ring should be replaced if it no longer holds a good seal due to cracks, tears, or becomes hardened. Caution should be taken to not over stretch the gasket when installing it.

Fix Number

FIX12008114

Manufacturer Part Number

SP0001436

Fix Number

FIX10311619

Manufacturer Part Number

535693

This is an authentic manufacturer-sourced component which is specially designed for use with DeLonghi coffee makers. It helps to provide a tight seal for the steam nozzle, unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable rubber material and is sold individually.

Fix Number

FIX10311176

Manufacturer Part Number

5332144800

Fix Number

FIX17828300

Manufacturer Part Number

SP0001841