Craftsman Table Saw Parts
Start With Your Model Number
Popular Craftsman Table Saw Parts
Fix Number FIX10051547
Manufacturer Part Number STD551025This is an 8 pack of flat washers and it is used for various power tools. These washers are a 1/4 inch in diameter, and made of metal. These are general use washers, and are usually positioned under a nut, or the head of a bolt.
Fix Number FIX10211611
Manufacturer Part Number 330005-01
John from SPRINGVILLE, CA
Old worn cord shorting out.Remove the four screws and carefully separate the casing at the trigger handle. Disconnect the terminals by lifting the switch slightly, just enough to remove the inside terminal. Needle nose pliers will make it easier to remove the terminals. Slip the cord protector over the new cord. Cut the two new wires to the proper length. I measured the old connectors for proper fit. Strip a half inch off the insulation, carefully crimp and solder the wires to each terminal, reconnect the terminals, reposition the cord protector, align and snap the casing back together, and replace the four screws. Plug it in and test for proper operation. Read more...