Craftsman Table Saw Hardware

Craftsman Appliance Parts

Popular Craftsman Table Saw Hardware

Retaining Ring
$6.25
In Stock
Fix Number
FIX10166028
Manufacturer Part Number
144803-00
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with circular saws and hammer drills. The special retaining ring is commonly used to secure the fan to the armature's shaft. This item is available as an individual replacement part, please see illustrated diagram for associative parts.
Lock Screw
$6.25
On Order
Fix Number
FIX10169800
Manufacturer Part Number
330045-05
This lock screw is used as a standard part that fits a variety of gardening and lawn tools. The screw is a torx T20. It has multiple uses and applications based on the tool. For installation instructions and proper safety guidance, refer to the manual provided by the manufacturer. *Please note: this screw is sold separately.
Torx Screw
$6.25
In Stock
Fix Number
FIX9943619
Manufacturer Part Number
330019-13
Genuine OEM replacement part, this item is sold individually. This screw is used in various places in all of the tools listed below The most common use for this screw is to secure plastic housings together. It has a Torx T-20 head.
Screw
$6.25
In Stock
Fix Number
FIX10169702
Manufacturer Part Number
330019-14
It is a genuine replacement screw that is sourced directly from original equipment manufacturer. This is a standard hardware that has multiple uses depending your tool. For correct location and use of this screw, please check appropriate diagrams. This torx screw is sold individually.
Shaft Elevating W/spring Pin
$6.25
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX10077401
Manufacturer Part Number
089037011024
This is an authentic replacement part manufactured for use with Ryobi table saws. The shaft connects to the handwheel and is used to raise and lower the height of the blade. This elevating shaft is sold as an individual replacement part, please see model diagram for associative parts.
Ecc. Screw-10 24 Bt3000
$6.25
In Stock
Fix Number
FIX10086032
Manufacturer Part Number
969502001
This metal screw is an OEM replacement part for use in Ryobi table saws. Screws will often become stripped and will need to be replaced. The eccentric screw requires a flat head screwdriver and is placed through two slides and screwed onto the table. This part is sold as a single item.
Nut,hex
$6.25
In Stock
Fix Number
FIX10169670
Manufacturer Part Number
330015-03
This hex nut with internal threads, screws to the shank of a bolt or a hex cap screw in a variety of lawn and gardening tools. It can have multiple applications depending on the tool you are using. To replace, you will need a wrench to loosen and tighten the nut. For detailed installation instructions, refer to the diagram provided by the manufacturer. Remember to unplug tool from power source before beginning this repair project.
Screw,plastite
$6.25
On Order
Fix Number
FIX9943615
Manufacturer Part Number
330019-02
This is a genuine manufacturer-sourced item that is specially designed for use with DeWALT, Porter Cable and Black and Decker equipment. It is an identical replacement for a missing or damaged screw that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually.
Miter Lock Clamp
$6.25
In Stock
Fix Number
FIX10086051
Manufacturer Part Number
969915002
This is a genuine OEM sourced replacement part designed for use with Ryobi table saws. This locking clamp helps to secure the sliding miter table assembly. It is made out of plastic and it is sold individually.
Spring Pin D4 X 20mm
$6.25
In Stock
Fix Number
FIX10081323
Manufacturer Part Number
414011003
The spring pin attaches to the clutch. This item is available as an individual replacement part. It is an OEM from Ryobi and Ridgid for use in table saws. When replacing this part a hammer and a punch might be required during the installation process. This part is made out of metal and will need to be replaced if it breaks.

Related Craftsman Table Saw Parts