OEM Delta Scroll Saw Parts & Accessories

Blade Chuck

$24.31

Fix Number: FIX10178031
Manufacturer Part Number: 5140099-98

Genuine Dewalt replacement part, this item is sold individually. This is a part of the blade holding assembly on the Scroll Saws listed below.>br>Along with the other parts shown in the parts diagram this will clamp the scroll saw blade and hold it in place.

Watch the install video

Clamp Knob Assembly

$22.13

Fix Number: FIX10168807
Manufacturer Part Number: 286303-00

This is a single OEM clamp knob assembly for a saw. The clamp knob is what secures the blade in the saw blade clamp. This assembly has a wingnut cast onto a threaded metal stud. With use, the clamping surface will deteriorate, which causes the blade to slip. The threads on the metal stud can also start to strip. For this quick and easy repair, you will need to disconnect the blade, and then unscrew and remove the clamp knob from the blade chuck. To install your new part, fasten the clamp knob into the blade chuck and reassemble the blade.

Foot

$14.13

Fix Number: FIX10168799
Manufacturer Part Number: 286292-00

This part is guaranteed OEM, made to fit the DeWALT and Delta scroll saws listed below. This hold down foot is attached to the top mount via the black bar. Note that mounting/adjustment screw is sold separately. This foot is sold individually. Associated parts: • Top Mount, part # 286277-00 • Bar, part # 286291-00 • Screw, part # 286316-00

Short Sleeve

$10.08

Fix Number: FIX10168800
Manufacturer Part Number: 286294-00

The short sleeve helps to distribute pressure evenly between connected components. Over time it will wear out, get damaged or lost eventually requiring a replacement. This authentic manufacturer-sourced part is specially designed for use with DeWALT and Delta scroll saws. Check the diagrams for your model for the exact location and the correct application of this hardware. Keep in mind this high-quality short sleeve is made of durable metal and is sold individually.

Brush

$10.02

Fix Number: FIX10168838
Manufacturer Part Number: 286346-00

Genuine DeWalt replacement part Includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Watch the install video

Switch

$35.15

Fix Number: FIX10177981
Manufacturer Part Number: 5140092-86

This is an OEM replacement part used in Delta and DeWALT scroll saws. It is an on/off switch and is sold individually, separate from the speed control knob. It is plastic with metal terminals. Over time, mechanical parts such as these wear down and must be replaced. To complete this repair you will need a hex key/allen wrench. • Remove old switch by pressing tabs • Disconnect wires • Attach wires to the new switch • Reassemble and test the tool

Bar

$14.97

Fix Number: FIX10168798
Manufacturer Part Number: 286291-00

This is a genuine OEM sourced replacement part that is intended to be used with scroll saws from DeWalt and Delta. The metal bar attaches to the top rocker mount and is used to support the foot that protects the blade. The bar will require a torx driver and hex driver to install, and the bar is priced as a single item.

Fuse,3a

$10.83

Fix Number: FIX10168837
Manufacturer Part Number: 286344-00

This fuse is a high quality part sourced from the original manufacturer for DeWalt and Delta scroll saws. The fuse is a safety feature to prevent an electric surge from overloading the motor. Once the fuse is tripped it will burn itself out, and will need to be replaced. This part is sold individually, keep in mind the fuse cap is sold separately.

Holder And Cap

$19.66

Fix Number: FIX11927427
Manufacturer Part Number: 5140163-11

It is a genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT and Delta scroll saws. These are the parts utilized to secure the fuse which is sold separately. One durable plastic cap and a holder are included. Make sure to check the owner's manual for your model to ensure the proper repair procedure. A screwdriver will be needed to take the housing apart to perform this repair.

Clamp

$6.51

Fix Number: FIX10168834
Manufacturer Part Number: 286338-00

This is a genuine OEM sourced clamp that it is specially made for use with DeWALT and Delta scroll saws. It is a standard hardware which has multiple applications based on the model of your unit, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this item. This high-quality clamp is made of durable metal and is sold individually. Keep in mind the screw is sold separately.

Delta Scroll Saw Parts

Popular Delta Scroll Saw Parts

Delta Scroll Saw Appliance Types

Popular Delta Scroll Saw Models

Delta Scroll Saw Parts

Start With Your Model Number

Popular Delta Scroll Saw Parts

Delta Scroll Saw Appliance Types

Popular Delta Scroll Saw Models