OEM Ryobi Band Saw Parts & Accessories

Band Saw Blade

$19.65

Fix Number: FIX16395041
Manufacturer Part Number: 682277001

Ball Bearing (6000lu)

$6.40

Fix Number: FIX9868401
Manufacturer Part Number: 039176001012

It is an original manufacturer supplied replacement item and is sold individually. This ball bearing is sealed on both sides. Ball bearings are made to reduce friction between two rotating parts. Because they experience constant pressure they would need to be checked and replaced periodically to ensure top performance. Please check diagrams for correct location and application of this bearing.

Pin (5 X 14)

$6.40

★★★★★

1 Review

Fix Number: FIX9871828
Manufacturer Part Number: 089120406054

Tire

$6.24

★★★★★

1 Review

Fix Number: FIX9871838
Manufacturer Part Number: 089120406067

This is an authentic Ryobi replacement part, and is sold individually. The bandsaw tire is an essential part of the band saw. It keeps the blade tracking correctly on the wheel. Overtime the belt will become stretched or cracked and you will notice the blade not tracking properly. This would be the time to change it. It is advised to change both tires instead of just one. This part is compatible with the band saws listed below.

Band Saw Guide Assembly

$6.51

Fix Number: FIX16325531
Manufacturer Part Number: 314448001

Switch Key

$6.40

Fix Number: FIX9871870
Manufacturer Part Number: 089120406106

The switch key attaches to the switch and helps to prevent unauthorized use. It is made of plastic and is sold individually. This is an authentic Ryobi replacement part that is sourced from the original manufacturer for use with band saws. No tools should be needed during the replacement of this part. It will need to be replaced if it breaks.

Guide Block (lower)

$6.40

Fix Number: FIX9871827
Manufacturer Part Number: 089120406053

It is a genuine component which is supplied by the original manufacturer for use with a Ryobi Band Saw. The lower guide block along with the upper guide block helps keep the blade from twisting while the machine is in use. Please note this is only the lower guide block the upper guide block is sold separately.

Guide Block (upper)

$6.40

★★★★★

2 Reviews

Fix Number: FIX9871826
Manufacturer Part Number: 089120406052

This authentic item is supplied by the original equipment manufacturer for use with Ryobi band saws. It is an identical replacement for a missing or a faulty guide block that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality guide block is made of durable metal and is sold individually.

Switch Assembly

$15.58

★★★★★

1 Review

Fix Number: FIX10078233
Manufacturer Part Number: 089110109712

Designed for use with Ryobi saws, this OEM approved replacement part is compatible with various models of Ryobi saws. For full compatibility, please see the "Model Cross Reference List" below. The purpose of the switch is to turn the device on/off, as well as playing a role in electric breaking by momentarily reversing electrical polarity. Due to the mechanical internals of switches, they tend to degrade and wear out over time, making them a commonly replaced part in power tools. Common symptoms of a broken switch include: the tool completely stops functioning, will not turn on, and turning off intermittently during use. The dimensions of this switch are approximately 3.5"x2.25". Switches are sold individually.

Installation Instructions

Charles from HIGHLAND, UT

Old switch, regardless of position, was always on.

1 removed 4 screws that held in old switch.
2 removed 4 electrical leads from old switch.
3. Orientation of lugs on new switch are different, so some bending is required to get switch back into housing.
4 test switch
5 screw on new switch. Read more...

Collet 1/4 Inch

$6.51

Fix Number: FIX16755887
Manufacturer Part Number: 690045003

This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi power tools. The collet allows a user to secure a bit. Note, it is for using bits with 1/4

Ryobi Band Saw Parts

Popular Ryobi Band Saw Parts

Installation Instructions

Ryobi Band Saw Appliance Types

Related Ryobi Band Saw Parts

Popular Ryobi Band Saw Models

Ryobi Band Saw Parts

Start With Your Model Number

Popular Ryobi Band Saw Parts

Installation Instructions

Ryobi Band Saw Appliance Types

Related Ryobi Band Saw Parts

Popular Ryobi Band Saw Models