OEM Ridgid Router Parts & Accessories

OUTER BLADE CLAMP

$5.95

Fix Number: FIX18696646
Manufacturer Part Number: 610121003

The outer blade washer is sourced from the original manufacturer, and is used with Ridgid power tools. The metal washer is used to secure the blade bolt of circular saws. This washer has an oval shaped arbor to fit the shape of the gear case spindle shaft. The washer is sold individually.

Adaptor 1/4 Collet Steel

$13.75

Fix Number: FIX18698605
Manufacturer Part Number: 672036001

This is an genuine OEM sourced replacement part used on routers. This part provides a grip for holding a bit in a tool. It is made out of metal and is sold individually. This collet is for using bits with 1/4" arbors only. Due to prolonged, heavy use a collet adapter may need to be replaced eventually. To replace this item you would need to use a Wrench. • First you would need to remove the collet nut • Once the nut is removed you can remove the old collet adapter • Place a new one in place • Tighten the collet nut back in place and your unit is ready to use 1/4" bits

Cone Sleeve Collett

$6.51

Fix Number: FIX18698489
Manufacturer Part Number: 671362001

This replacement collet is designed for use with Ridgid trimmers. It is a genuine item that is sourced directly from original equipment manufacturer. This collet is used to secure bits. Over time a collet may wear out requiring replacement. It is made out of metal and is sold individually. Please note the collet nut is sold separately. This collet is cone sleeved To replace this item you would need to use a wrench. • Make sure the tool is unplugged • First you would need to remove the collet nut • Once the nut is removed you can remove the old collet • Secure the new one in place • Tighten the collet nut back in place and test the tool

Installation Instructions

mike from MIAMI, MO

collet was broke/ replaced with new

Insert new piece Read more...

Brush Holder

$6.51

Fix Number: FIX16236279
Manufacturer Part Number: 089037012106

This part is an OEM from Ridgid for use in table saws. The brush holder goes between the brush and the motor housing. A screwdriver may be required to replace this item if it becomes broken. This part is made out of plastic and metal and is available individually.

BRUSH HOLDER CAP

$6.51

Fix Number: FIX18687790
Manufacturer Part Number: 089041033191

It is an authentic OEM sourced replacement part which is specially produced for use with Ridgid power tools. This part is generally utilized to secure the carbon brush in the brush holder, keep in mind his cap has external threads that thread into the housing of the tool. Please note this durable cap is made of high-quality plastic and is sold individually. You will need a flat-head screwdriver to install or remove this brush holder cap.

BRUSH ASSEMBLY

$6.51

Fix Number: FIX18693541
Manufacturer Part Number: 290108002

This is an individually sold carbon brush. Keep in mind that most power tools will have two of these, and it is recommended to replace them at the same time. The motor requires these brushes to conduct electricity to the armature. Due to constant friction, these brushes will wear and require regular replacing. For this fast and simple repair, use your screwdriver to remove the brush cap and this will give you access to the brush.

Collet Nut

$6.51

Fix Number: FIX18698488
Manufacturer Part Number: 671361001

Circular Saw Lock Nut (M5)

$6.51

Fix Number: FIX10083854
Manufacturer Part Number: 670974003

This is a genuine component which is supplied directly from the original equipment manufacturer for Ryobi and Ridgid equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this hardware. Keep in mind this high-quality lock nut is made of durable metal and is sold individually.

Tile Saw Ball Bearing

$6.51

Fix Number: FIX9995584
Manufacturer Part Number: 671498001

Brush Cap

$6.51

Fix Number: FIX10098112
Manufacturer Part Number: 516851001

This manufacturer sourced replacement part designed for use on Ridgid power tools. The purpose of the brush cap is to hold the brush in the tool. This cap has external threads that thread into the housing of the tool. Be careful when removing and replacing these, they have a tendency to break. This item is made out of plastic and it is sold individually. You would need a flathead screwdriver to install or remove this brush cap.

Ridgid Router Parts

Popular Ridgid Router Parts

Installation Instructions

Ridgid Router Appliance Types

Related Ridgid Router Parts

Popular Ridgid Router Models

Ridgid Router Parts

Start With Your Model Number

Popular Ridgid Router Parts

Installation Instructions

Ridgid Router Appliance Types

Related Ridgid Router Parts

Popular Ridgid Router Models