OEM Homelite Pressure Washer Parts & Accessories

Air Purge Bulb

$4.99

Fix Number: FIX9867073
Manufacturer Part Number: 01183

This air purge bulb fits gardening tools such as trimmers, saws, leaf blowers, and power brooms. The air purge bulb purges air from the carburetor and delivers fuel up through the fuel line into the carburetor. When the carburetor is full of fuel, the bulb pushes the excess fuel back into the tank. If your bulb lost its elasticity or has begun to crack, then it is best to replace it. It is recommended that before you repair, to drain the fuel from the tank. Refer to the manual provided by the manufacturer for installation instructions.

Wheel

$13.47

Fix Number: FIX16324400
Manufacturer Part Number: 308451067

Detergent Suction Kit

$5.19

Fix Number: FIX9938134
Manufacturer Part Number: 308452002

This is an OEM detergent suction kit, also referred to as a chemical injection kit, for a pressure washer. This kit is threaded into the pump assembly and is connected to the chemical siphon tube that is located in a container that holds the cleaner. This kit includes, (1) bronze nozzle, (1) large O-ring, (1) small O-ring, (1) steel ball, (1) spring (5 components total). For this repair, use a pair of pliers to grasp the detergent supply tube and remove the tube from the chemical injector. Remove the old injector with a wrench. To prepare the kit, start by placing the O-rings on the bronzed nozzle, then the steel ball, then the spring. Apply lubricant on the large O-ring and then thread it back into the port.

Fixes these symptoms

Leaks water
See more...

Spray Wand

$12.40

Fix Number: FIX12090574
Manufacturer Part Number: 308494075

This is an OEM spray wand for a pressure washer, sold individually. The spray wand attaches to the trigger handle, and the nozzle attaches to the end of the spray wand. It has a fitting size of 1/4-inches. The most common reason for replacing the spray wand is when water is leaking from it. There are a few common causes of a leaky wand, including a damaged O-ring, where it attaches to the trigger handle, or a damaged O-ring or coupler where the nozzle is attached. There also may be a crack in the plastic housing. This is a simple replacement that does not requiring any tools.

High Pressure Hose

$24.55

★★★★★

2 Reviews

Fix Number: FIX9938515
Manufacturer Part Number: 308835065

This is an OEM quality high pressure hose for a pressure washer. It is constructed with a durable rubber/plastic material and measures 25-feet long. It has a 6-mm braid and produces a 1700 PSI. The high pressure hose connects to the trigger handle on one end and the pump on the other. This high pressure hose consists of an outer covering which provides strength to the hose. If this outer covering becomes damaged, it needs to be replaced immediately. A kinked or broken hose can produce a high pressure leak, which can be dangerous, so please replace this hose as soon as leaks or damage are noted.

Fixes these symptoms