OEM Jet Planer Jointer Parts & Accessories

Ball Bearing

$40.28

Fix Number: FIX10463888
Manufacturer Part Number: BB-6203ZZ

This ball bearing is 17 mm and fits a variety of gardening power tools. The ball bearing has two contact rubber seals on each side and two non-contact metal shields on each end as well. Tip: if your tools needs only one seal or shield, then take off one of the shields or seals from this ball bearing. Refer to the manual provided by the manufacturer for further installation instructions and a detailed diagram.

Installation Instructions

Adam from FREMONT, NE

Saw was making loud screeching noise and unsatisfactory cuts

1: disconnect power and remove blade
2: remove spanner nut
3: remove arbor nut. Spins opposite:
righty loosy lefty tighty
4: remove arbor with mallet and dowel
5: use arbor press to take off ball bearing
6: press on new bearing Read more...

Ball Bearing

$43.95

Fix Number: FIX10463886
Manufacturer Part Number: BB-6202ZZ

This is an authentic OEM replacement part for certain models of Jet, Powermatic, and Wilton tools that is sourced from the manufacturer. To ensure that this will fit your tool, please see the "Model Cross Reference List" below. This part has an outer diameter of 1.5", and metal shielding on both sides. The bearing is used to reduce friction between two rotating parts. It keeps wear on the equipment to a minimum, and helps the mechanics run efficiently. Depending on how often you use your tool, your bearings will need routine replacement due to continual pressure on them. Signs of broken or failing Ball Bearings include squealing, screeching, or grinding noise when powering the device off. Each is sold individually.

Bevel Gear

$8.54

★★★★★

1 Review

Fix Number: FIX10394572
Manufacturer Part Number: PGM-B02

This Bevel Gear is a genuine manufacturer sourced replacement part designed for use with Jet planers. To ensure this will fit your planer, please see the "Model Cross Reference List" below. This part is an essential part of the unit that allows the user to adjust the planers position. If you have difficulties adjusting the height, or if the gear teeth break, they need to be replaced. This part is approximately 1.1" in diameter, is made of durable metal, and is sold individually.

Watch the install video

Switch

$67.15

Fix Number: FIX10382827
Manufacturer Part Number: 994542

Magnetic Switch 230V 1PH

$242.99

★★★★★

1 Review

Fix Number: FIX10390616
Manufacturer Part Number: JTAS10-23

Genuine manufacturer approved replacement magnetic switch that is specially made for Jet saws. It is the part of the tool handling on/off operations. Over time switch components may wear out eventually requiring replacement. This high quality switch has a plastic body and it is sold individually.

Installation Instructions

DAVID from AUBURN, IN

On /off switch was sticking and had to punch it several times

Ordered a new switch from you and installed it but nothing works. Called Jet and waiting to hear back. May have to take it to a dealer but am very frustrated as I am working on a large project and was hoping to complete it this week. Any suggestions will help.

Thank You
Dave W. Read more...