DeWALT Planer Jointer Blades

Fix Number

FIX11925467

Manufacturer Part Number

273794

This is a 3-1/4-inch reversible carbide tipped blade for a planer. It is an OEM authorized part and is sold individually. If the blade is chipped or is not performing as well as it once did, it should be replaced. The blade is what planes the workpiece and leaves a smooth finish. To remove the old blade, start by removing the drum cover. Unfasten the bolts that secure it in place. Use a screwdriver to slide the blade out of place and then pull it out to remove.

Fix Number

FIX12525877

Manufacturer Part Number

N447366

Fix Number

FIX10186874

Manufacturer Part Number

DW7352

This is a Genuine Manufacturer Approved replacement blade set designed for specific Dewalt Planer. This set contains Three (3) original DeWALT 13'' Disposable, Reversible Thickness Planer Knives. Vacume Heat Treating Provides longer blade life before user needs to flip to the second side. Machined locator holes help align knives on cutter heads during knife changes.

Fix Number

FIX11929137

Manufacturer Part Number

DW7342

This is a genuine OEM part from DeWALT. This planer blade set comes with 3 knives and are to be used in the DW734 Type 1 12-1/2 inch Planer. The metal knives are designed to trim wooden boards to flatten out the surfaces. The blade is fitted between the cutter head and the blade clamp, and will require a screwdriver to install properly. This item is sold as a package containing 3 knives.

Fix Number

FIX12460554

Manufacturer Part Number

5140101-80

This planer blade is a genuine Porter Cable part. It is supplied directly from original equipment manufacturer for use with planers. These double edged high speed steel blades keeps a sharp edge longer. Planer's knives are machined to make very precise cuts. Please note, this metal blade is sold individually. To replace the blades you will need a wrench. • Place planer upside down • Loosen the three nuts using the wrench • Rotate the blade guard downward • Carefully remove the blade by sliding it out of the holder • Slide the new blade sideways into the holder until it is against the end stop • Blade groove must be toward back of unit • Securely tighten the three nuts using the wrench supplied • Rotate the blade drum 180 degrees and repeat for other blade • Always replace both blades at the same time

Fix Number

FIX10186871

Manufacturer Part Number

DW7332

This is a set of two (2) steel planer blades. Those are genuine OEM replacement parts designed to work with Makita planers. M2 laminated high speed tool steel keeps a sharp edge longer. A planer's knives are machined to make very precise cuts. When your knife blades wear down, you won't get the level of precision you require. To replace the blades you will need a wrench.

Fix Number

FIX12489115

Manufacturer Part Number

N514055

This is a genuine replacement part sourced directly from the manufacturer. The blade is commonly found in plate joiners from DeWALT and Black & Decker. This part is made of metal, and is used as the active cutting element for the machine. You may require a wrench or screwdriver when replacing this item. The blade is sold as an individual replacement part.

Fix Number

FIX10184096

Manufacturer Part Number

663291-00

These blades are genuine DeWalt replacement parts manufactured for use with portable hand planers. The blades of the planer will wear down and can be sharpened but should be replaced after extensive use. This pair of blades are sold as individual pairs.

Fix Number

FIX12464868

Manufacturer Part Number

5140101-78

This is an original Makita replacement part manufactured for use with electric hand planers. This blade support is used to fasten the blade to the blade clamp. The blade support is sold as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX10177911

Manufacturer Part Number

5140071-50