DeWALT Planer Jointer Springs and Shock Absorbers

Fix Number

FIX10176203

Manufacturer Part Number

5140011-04

The metal spring connects to the idler shaft and is a genuine item that is supplied directly from the original manufacturer for use with planers made by DeWALT. This part is priced as an individual replacement part. It may become broken and will need to be replaced. A set of pliers and a wrench may be necessary during the replacement of this spring.

Fix Number

FIX10176263

Manufacturer Part Number

5140011-69

Fix Number

FIX10170704

Manufacturer Part Number

385946-00

Fix Number

FIX10176179

Manufacturer Part Number

5140010-79

This is an authentic DeWalt replacement part manufactured for use with planers. The spring is used to provide downward tension to allow the roller to press against the wood being passed through the planer. The springs are available individually, please see model diagram for associative parts.

Fix Number

FIX10176238

Manufacturer Part Number

5140011-43

Fix Number

FIX10168680

Manufacturer Part Number

285972-00

This metal spring is sold individually and goes between the blade binder and the planer blade. The spring will need to be replaced if it becomes bent or broken. A wrench may be needed during the installation of this item. This is a DeWALT replacement part directly sourced from the manufacturer to be used in planers.

Fix Number

FIX10168669

Manufacturer Part Number

285961-00

The spring attaches to the bushing and is priced individually. This part is an OEM from DeWALT for use in planers. During in the installation of this part, a screwdriver may be needed. It is made out of metal and will need to be replaced if it becomes broken or bent.

Fix Number

FIX10185078

Manufacturer Part Number

868082-00

This spring-governor is an OEM part which is designed for DeWALT and Black and Decker equipment. It applies tension on the wing screw. Over time it may wear out and stretch eventually requiring a replacement. It is made of a high-quality metal and is sold as an individual component. Refer to the appropriate diagrams for your model for the exact location and the correct application of this hardware. Replacing it is a simple task that does not require any special tools.

Fix Number

FIX10168619

Manufacturer Part Number

285907-00

This is a genuine DeWALT replacement part. The spring plate is designed by the manufacturer for use with planers. This part is made of metal, and is placed on either side of the base where it connects with the tables. You will require a screwdriver when replacing this item. Although there are two spring plates in the machine, this part is sold individually.

Fix Number

FIX10168656

Manufacturer Part Number

285946-00

This authentic part is supplied by the original equipment manufacturer for use with DeWALT planers. The spring applies tension on the connected parts. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal and is sold as an individual item. Check the diagrams for your model to ensure the proper repair procedure. A wrench set and pliers might be needed to replace this spring.