OEM Yard Man Snow Blower Parts & Accessories

Shear Pin, .25

$3.99

Fix Number: FIX9110822
Manufacturer Part Number: 738-04124A

Designed for use in MTD, Yard Machine, Troy-Bilt, Yard-Man, and Craftsman machines, this OEM approved Shear Pin fits a variety of models. For full compatibility, please see the "Model Cross Reference List" below. This is a shear pin for your lawn and garden equipment, most commonly your snow blower. It is designed to snap if your auger gets jammed or clogged, to protect your snow blower from further damage. Because this part is meant to snap at a certain point of pressure, it is a commonly replaced part in snow blowers. Consequently, we recommend keeping a spare on hand. This Shear Pin is approximately 1.75" long, and is sold individually.

Bow Tie Cotter Pin

$3.99

Fix Number: FIX9096195
Manufacturer Part Number: 714-04040

This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.

Nut, Flange Lock, 5/16-18, Grf

$4.10

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Carriage Bolt, 5/16-18 x .75

$4.07

Fix Number: FIX10001568
Manufacturer Part Number: 710-0451

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Auger Cable

$24.80

Fix Number: FIX12685355
Manufacturer Part Number: 946-04230B

Snow blower clutch cable. The clutch cable engages the snow blower's auger. If the cable is broken, the auger won't turn.

Nut, Flange Lock, 3/8-16, Grf

$4.24

Fix Number: FIX9095080
Manufacturer Part Number: 712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

V-Belt

$29.29

Fix Number: FIX11813754
Manufacturer Part Number: 954-04050A

Nut, Flange Lock, 1/4-20, Grf

$4.19

Fix Number: FIX9299574
Manufacturer Part Number: 712-04064

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.

Hex Flange Nut 5/8-18 Thd.

$7.49

Fix Number: FIX10003369
Manufacturer Part Number: 712-0417A

This part includes one hex flange nut that is compatible with various outdoor equipment. It has a thread of 5/8-18 and consists of a hex nut with a wide flange on one end. The flange works like a washer to ensure the nut fastens to the components surface proportionately. If it has been removed when doing repairs or taking components apart, it should be replaced, and never re-used. All the nuts on your equipment should be inspected and tightened at least annually. To remove this hex flange nut, you will need a 15/16-inch socket. The torque spec for this nut is 70-90 ft-lbs.

Drive Clutch Cable

$21.87

Fix Number: FIX10033930
Manufacturer Part Number: 946-04229B

Yard Man Snow Blower Parts

Popular Yard Man Snow Blower Parts

Installation Instructions

Installation Instructions

Yard Man Snow Blower Appliance Types

Popular Yard Man Snow Blower Models

Yard Man Snow Blower Parts

Start With Your Model Number

Popular Yard Man Snow Blower Parts

Installation Instructions

Installation Instructions

Yard Man Snow Blower Appliance Types

Popular Yard Man Snow Blower Models