OEM Snapper Snow Blower Parts & Accessories

Hose, Fuel

$9.85

Fix Number: FIX16439931
Manufacturer Part Number: 791766

Snow Blower Greased Bearing

$13.36

Fix Number: FIX9270711
Manufacturer Part Number: 2108202SM

This greased bearing is used on lawn and gardening tools and is sold individually. This part works to reduce friction between rotating parts. This happens when the balls receive the load and spin, which spreads the weight equally whilst the minimal contact area of the part reduces the friction. It is important to repeatedly check for bearings and replace them periodically as they experience constant wear when in operation from pressure, vibration, and heat. For this repair you will need a screwdriver and a set of wrenches. Remember to unplug or turn off power tool before starting this installation project.

Filter--Fuel (White, 75 Microns)

$6.51

Fix Number: FIX9278033
Manufacturer Part Number: 394358S

This is a genuine OEM approved replacement fuel filter which is specially designed for use with gas-powered lawn and garden equipment. Its purpose is to ensure the fuel that is supplied into the engine is free of dust or other harmful contaminants, over time it may become clogged restricting the fuel flow and eventually requiring a replacement. It is made of high-quality plastic and it is sold individually.

Snow Blower Assembly Chute

$58.25

★★★★★

2 Reviews

Fix Number: FIX9304189
Manufacturer Part Number: 762222MA

Snow blower discharge chute.

Fixes these symptoms

Can't adjust chute
See more...

Snow Blower Shear Pin

$6.51

Fix Number: FIX9999468
Manufacturer Part Number: 703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Please note the cotter pin used to secure this pin is sold separately. In order to install or remove this pin you will need pliers.

Snow Blower Extension Spring

$9.91

Fix Number: FIX8896604
Manufacturer Part Number: 1736469YP

This part is an OEM from Craftsman for use with Snow Blowers. The extension spring is used to provide tension between the link rods, and disconnect arm which slows the riding lawnmower down when the speed control is pushed. The most common reason for replacing the spring is if the drive belt does not have enough tension to engage the auger pulley because the spring is broken. This part is sold individually. The tool that you will need to replace the extension spring is a socket wrench.

Wheel,friction 4.3 Ru

$32.95

Fix Number: FIX9263021
Manufacturer Part Number: 1501435MA

This is an original part from Craftsman for use with Craftsman Snowblowers. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. The most common reason for replacing the friction wheel is when the snowblower's wheels don't turn.This part is sold individually. Disconnect the spark plug wire before installing this part. The tools that you will need to replace the friction wheel disc are 3/8" socket, 9/16" socket, adjustable wrench, hammer, 1/2" socket, flat-head screwdriver, and lubrication.

Fixes these symptoms

Drive system does not work
See more...

Snow Blower Belt

$27.45

Fix Number: FIX9042546
Manufacturer Part Number: 585416MA

This Auger Drive Belt is an original part from Craftsman for use with Craftsman Snowblowers. The auger drive belt rotates the auger on the snowblower. The most common reason for replacing the drive belt is when the snowblower auger won't turn.This part is sold individually. Her is a list of tools that are needed to replace the auger drive belt are a 3/8 inch socket, 9/16 inch wrench, adjustable wrench and a clamp.

Fixes these symptoms

Auger will not turn
Will not blow snow
See more...

Bearing Auger Black

$8.49

★★★★★

1 Review

Fix Number: FIX9174338
Manufacturer Part Number: 9517MA

This is available as an individual replacement part. The auger bearing connects to the auger plate and is made of plastic. If this part becomes broken it will need to be replaced and may require a screwdriver during the installation. It is an OEM Craftsman part directly sourced from the manufacturer for use in snowblowers.

Kit, Scaper Bar & Flight

$153.58

Fix Number: FIX10069504
Manufacturer Part Number: 1687806

This maintenance kit replaces worn ground contact parts on select single stage snow blowers, it includes a scraper bar and auger paddles that help lift snow and send it through the chute, install it when snow pickup is poor or the original parts are worn down, disconnect the spark plug wire before service, use the exact model number to confirm fit.

Fixes these symptoms

Will not blow snow
See more...

Installation Instructions

James from BYRON, IL

Bottom scraper was wore out

Took old scraper off and put new one on. There was a metal piece they sent with the kit wasn’t sure wher it went for sure because the original didn’t have this piece and there was nothing that explained where it went . I kinda figured what it’s purpose was and attached it in the proper place. Read more...

Snapper Snow Blower Parts

Popular Snapper Snow Blower Parts

Installation Instructions

Snapper Snow Blower Appliance Types

Related Snapper Snow Blower Parts

Popular Snapper Snow Blower Models

Snapper Snow Blower Parts

Start With Your Model Number

Popular Snapper Snow Blower Parts

Installation Instructions

Snapper Snow Blower Appliance Types

Related Snapper Snow Blower Parts

Popular Snapper Snow Blower Models