OEM Husky Snow Blower Parts & Accessories

Nut-flglk 5/16-18

$6.51

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Snow Blower Shave Plate (24 In)

$40.07

★★★★★

1 Review

Fix Number: FIX9306312
Manufacturer Part Number: 790-00120-0637

This is an authentic OEM sourced part which is specially manufactured for use with walk-behind snow throwers. The shave plate is used to scrape up the snow, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. This high-quality shave plate is made of durable material and is sold individually. Keep in mind the hardware to secure it is sold separately.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Flange Bushing

$6.55

Fix Number: FIX16421956
Manufacturer Part Number: 741-0493C

This authentic manufacturer-supplied part is designed for Craftsman snowblowers. Flange bushings are used to provide support for components while allowing them to rotate with minimum friction. It is made of high-quality material and is sold individually. Make sure to check the diagrams for your model to ensure the correct replacement procedure. You may need a screwdriver and a wrench set to take apart and reassemble the equipment when performing this repair.

Carriage Bolt 5/16-18 x 3/4" Lg.

$6.51

Fix Number: FIX9298671
Manufacturer Part Number: 710-0451

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Fuel Bowl O-Ring

$9.98

Fix Number: FIX17016670
Manufacturer Part Number: 951-11589A

This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requiring replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.

Wheel-friction 4.

$20.05

Fix Number: FIX9311064
Manufacturer Part Number: 935-0243B

This item has been sourced from the original manufacturer to be used with snowblowers from MTD, Ryobi, Yard Machines, Bolens, and Yard-Man. This item is the hard rubber tire that fits onto the friction wheel and is used to rotate the friction disc. Overtime this item can wear down and need to be replaced to make good contact with the friction disc. This item is available as an individual replacement part.

Fixes these symptoms

Drive system does not work
See more...

Snow Blower Auger Clutch Cable

$30.75

Fix Number: FIX9170571
Manufacturer Part Number: 946-0897

Fixes these symptoms

Auger will not turn
See more...

Cable-clutch X 39.

$36.90

Fix Number: FIX9170572
Manufacturer Part Number: 946-0898

This is an authentic OEM sourced replacement part designed for use with snow throwers/blowers. It allows you to engage and disengage the unit. This cable is sold individually. You may need pliers to complete this repair. • Remove the cable end from the control head and install the new one • Now you can run the new cable down to the control handle • Attach the other end of the cable • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable

Fixes these symptoms

Drive system does not work
See more...

Installation Instructions

Leonard from South Hadley, MA

Drive would Slip in and out then unable to engage traction control.

Removed frame cover. Found broken Idler Spring. This is what cause the slipping and clunking noise. also check or replaced as I did.t The Extension Spring is a little harder to get to. With the idler spring broken this cause the friction wheel and support bracket to break the Drive Clutch Cable Spring and Support Bracket Spring. Easy to replace. At this time clean and oil the part called 7-tooth shaft. This helped shifting speeds. Be careful not to get any oil on the friction wheel or the friction disc. FYI Problems like this will always happen at the wrong time. The web site easy to use but the illustrations and part numbers could be better to read. Need to have clearer zoom and part number to part. Not sure part name like spring-extension or extension-spring. So I purchased both parts. This snow blower easy to use and repair. A simple design. Read more...

Shoe-slide

$31.10

Fix Number: FIX9135084
Manufacturer Part Number: 784-5580-0637

This slide or skid shoe fits snow blowers and is attached to the auger housing. The shoe slides around the ground to ensure the snow blower glides and moves easily. It also elevates the auger housing to protect it from damage. *Please note: this part is sold individually. It is recommended both skid shoes are replaced to prevent unevenness. Refer to the diagram provided by the manufacturer for further installation instructions and safety practices.

Bushing-.380 Id

$6.51

Fix Number: FIX9167515
Manufacturer Part Number: 941-0475

This is a plastic bushing for your lawn equipment. It fits onto the side of your fuel tank, and holds the fuel fittings so they do not touch sharp metal. This part is made of plastic, and will eventually wear out. When that happens, you must replace it. Before making this repair, we recommend letting your machine cool, and draining the gas tank.

Husky Snow Blower Parts

Popular Husky Snow Blower Parts

Installation Instructions

Installation Instructions

Installation Instructions

Installation Instructions

Husky Snow Blower Appliance Types

Popular Husky Snow Blower Models

Husky Snow Blower Parts

Start With Your Model Number

Popular Husky Snow Blower Parts

Installation Instructions

Installation Instructions

Installation Instructions

Installation Instructions

Husky Snow Blower Appliance Types

Popular Husky Snow Blower Models