Models
>
31AS6ACD731
31AS6ACD731 (2005-2) Husky Snow Blower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$6.51
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...
In Stock
Order now and your part arrives by Oct 29
$6.55
This authentic manufacturer-supplied part is designed for Craftsman snowblowers. Flange bushings are used to provide support for components while allowing them to rotate with minimum friction. It is m...
In Stock
Order now and your part arrives by Oct 29
This is an authentic OEM sourced part which is specially manufactured for use with walk-behind snow throwers. The shave plate is used to scrape up the snow, please make sure to refer to the owners man...
In Stock
Order now and your part arrives by Oct 29
$45.05
This part is sold by color. Please see color options below to see what part number you need to order. Color: Majestic Orange. Part Number: 790-00121-0606. Color: Powder Black. Part Number: 790-00121...
In Stock
Order now and your part arrives by Oct 29
In Stock
Order now and your part arrives by Oct 29
Special Order
$37.35
This replacement shave plate is a high-quality item supplied directly from original equipment manufacturer for use with snow throwers. Its purpose is to scrape the ground to help pick up the snow. Sha...
In Stock
Order now and your part arrives by Oct 29
Special Order
$25.71
This replacement part is an authentic manufacturer-sourced component which is specially designed for use with snowthrowers. It is mounted to the lower chute to help direct the snow away from the unit....
Special Order
$6.51
This is a genuine replacement part manufactured for use with lawn and garden equipment. This hex head screw is flanged and has several applications. Please see model diagram and parts list for screw l...
Special Order
In Stock
Order now and your part arrives by Oct 29
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from HARRISVILLE, NH
- Parts Used:
- 790-00121-0637
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app
... Read more
ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from FRANKLIN, MA
- Parts Used:
- 790-00118-0637
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
badly worn shave plate
unbolt plate and swap over new plate
Was this instruction helpful to you?
Thank you for voting!