Official Weed Eater Lawn Tractor Switches

Lawn Mower Ignition Switch

$31.53

Fix Number: FIX9020864
Manufacturer Part Number: 532193350

This ignition switch has been sourced directly from the original manufacturer and is sold individually (key sold separately). The ignition switch is also sometimes referred to as a starter switch and is enclosed in a plastic housing. A common sign that this part is malfunctioning is if the electric starter is not engaging. For this quick and easy repair, start by making sure the switch is in the off position and the key has been removed. Lift the hood up, locate the steering housing and press the tabs to disengage the old switch. Disconnect the wires and install your new OEM ignition switch.

Fixes these symptoms

Will Not Start
See more...

Lawn Mower Power Take-Off Switch

$38.39

Fix Number: FIX11824426
Manufacturer Part Number: 582107601

This is a genuine OEM power take-off (PTO) switch for a ride-on lawn mower. This switch engages the electric clutch to spin the blades. This part includes one plastic PTO switch with a push-pull, snap mount and eight terminals. Mechanical switches, such as this one, will break down over time, and will need to be replaced. This is a quick and easy repair. Disconnect the spark plug before you begin. Disconnect the wires under the housing, remove the old switch by pressing the side tabs. Place the new PTO switch into position, reconnect the wires and spark plug, and test your equipment to make sure it is working.

Lawn Mower Ignition Switch

$34.27

Fix Number: FIX9286662
Manufacturer Part Number: 532175566

This is an OEM sourced replacement ignition switch. It is commonly used on a variety of riding lawn mowers/tractors. Switch plays an important role because it allows user to easily start the mower using only a turn key. Because switches have mechanical internal parts, over time they will begin to fail requiring replacement. It has a plastic body and it is sold individually. Please note, the key is not included, it is sold separately. To replace this switch no tools will be needed. • Unplug the wires from an old switch • Remove the switch by squeezing tabs • Secure new switch in the opening • Reattach wires and test the new switch

Lawn Mower Interlock Switch

$28.55

Fix Number: FIX9013223
Manufacturer Part Number: 532176138

It is a genuine manufacturer-approved part which is specially designed for Ryobi and Husqvarna riding lawn mowers and garden tractors. The purpose of the switch-interlock is to act as a safety feature which will shut the engine off when equipment is started or running in unsafe operating conditions. Unfortunately, over time parts will wear out and it may begin to fail eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams for your model for the correct location and installation of this component. Note, this high-quality plastic body interlock switch is sold individually. You will need a screwdriver to perform this repair.

Switch, Snapmount, Nc

$20.85

Fix Number: FIX9016734
Manufacturer Part Number: 532421062

This is an authentic OEM part for use with Craftsman Lawn Tractors. The interlock switch disables the ignition system if it detects the lawn tractor is started or running in unsafe operating conditions. This part is sold individually. The most common reasons for replacing the clutch interlock switch are when the mower won't start or starts when the brake is not depressed. The tool needed to replace the seat switch plunger is a -+ inch socket.

Switch, Interlock (clutch)

$26.35

Fix Number: FIX9288217
Manufacturer Part Number: 539101080

It is a genuine manufacturer-approved part which is specially designed for use with Poulan, Weed Eater and Husqvarna riding lawn mowers and garden tractors. The purpose of the interlock switch is to act as a safety feature which will shut the engine off if the driver leaves the seat. Unfortunately, over time parts will wear out and it may begin to fail eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the correct location and installation of this component. Note, this high-quality plastic body switch is sold individually. You may need a screwdriver and pliers to perform this repair.

Lawn Mower Seat Switch

$26.35

Fix Number: FIX9286970
Manufacturer Part Number: 532192749

This seat safety switch is used on riding lawn mowers and lawn tractors to detect whether the operator is seated. It prevents the engine from starting or shuts it off if the operator leaves the seat, helping ensure safe operation. It’s a direct replacement for worn or faulty switches to restore proper safety interlock function.

Lawn Mower Interlock Clutch Cable Switch

$26.35

Fix Number: FIX9015713
Manufacturer Part Number: 532197802

This part is an OEM from Husqvarna, Poulan and Weed Eater for use with Lawn Tractors. The Interlock switch disables the ignition system if it detects the lawn tractor is started or running in unsafe operating conditions. The most common reasons for replacing the clutch interlock switch are when the mower won't start or starts when the brake is not depressed. This part is sold individually. The tool that you will need to replace the clutch interlock switch is a -+ inch socket.

Switch, Ignition

$36.59

Fix Number: FIX9016155
Manufacturer Part Number: 532365402

This switch is a replacement part for Craftsman mowers and tractors. This part includes: 2 keys, switch and a nut. This switch gives current to the starter to turn on the engine. Please disengage the spark plug wire, before you start replacing this part.

Switch, Ign

$47.99

Fix Number: FIX9010385
Manufacturer Part Number: 532140301

This is an authentic manufacturer approved replacement ignition switch sourced from original equipment manufacturer. It is designed for use with a variety of riding lawn mowers/tractors. It allows user to start their equipment using a simple ignition turn key (sold separately). This switch has a metal body and it is sold individually. Replacing this switch is easy and would only require a wrench or pliers. • Reach under cover/housing and disconnect wiring harness from the old switch • Remove nut that secures the switch to the housing • Pull out the switch • Secure new switch in place • Reconnect wires and secure the nut • Reassemble and test the unit

Weed Eater Lawn Tractor Switches

Popular Weed Eater Lawn Tractor Switches

Related Weed Eater Lawn Tractor Parts

Weed Eater Lawn Tractor Switches

Start With Your Model Number

Popular Weed Eater Lawn Tractor Switches

Related Weed Eater Lawn Tractor Parts