Weed Eater Lawn Tractor Pulleys

Fix Number

FIX9015257

Manufacturer Part Number

532195945

This authentic manufacturer-sourced mandrel pulley is designed for use with Craftsman lawn mowers. It serves as a direct replacement for a missing or damaged pulley originally installed on the unit, helping to maintain proper blade and deck operation. Constructed from durable metal for long-lasting performance, this high-quality part is sold individually. Please refer to your model’s parts diagram to ensure correct placement and compatibility. Note that the hardware required to secure the pulley is sold separately.

Fix Number

FIX9287043

Manufacturer Part Number

532196106

This replacement idler pulley is an original part sourced directly from the equipment manufacturer and is designed for use with select Poulan and Husqvarna riding lawn mowers and garden tractors. It plays a key role in maintaining proper belt tension, which is essential for smooth and efficient mower operation. Made from high-quality materials for durability, this pulley may need to be replaced over time due to wear or damage. Installation requires a wrench to remove and secure the mounting hardware. The idler pulley is sold individually, and it’s recommended to consult your model’s diagram to ensure correct placement and installation.

Fix Number

FIX9014454

Manufacturer Part Number

532173436

This is an authentically sourced OEM mandrel pulley, designed for lawn tractors (riding mowers) with a 42-inch deck. It is sold individually. This durable metal part measures approximately 5-3/16-inches in outer diameter and the spindle mounting hole measures about 5/8-inches. This part plays a crucial part by transferring the energy from the motor to the blades, using belts. If this pulley is damaged, this can impact the engines performance, and should be replaced immediately to avoid further damage.

Fix Number

FIX9016399

Manufacturer Part Number

532194327

This is a flat idler pulley, approved by the manufacturer for use in lawn tractors. The pulley provides tension to the belt. For this DIY repair you will need a wrench and pliers. You will start by removing the mower deck, unfasten the bolt that tightens the pulley and remove the drive belt and all the bolts and washers from the pulley. Install the new flat idler pulley, install the belt, and reassemble the mower deck.

Fix Number

FIX9016377

Manufacturer Part Number

532194326

This V-groove idler pulley helps maintain proper tension on the mower’s drive belt, allowing smooth and reliable forward and reverse movement. Designed with a grooved profile to securely guide the belt, it supports consistent traction and reduces slippage during operation. With an approximate 3.5-inch diameter and 3/8-inch bore, and built with a durable construction and sealed bearing, it is made to withstand wear and vibration. Replacing a worn or damaged pulley can restore proper belt tension and improve overall drive performance.

Fix Number

FIX9286701

Manufacturer Part Number

532177968

This is a genuine replacement part sourced directly from the manufacturer. The engine pulley is commonly found in Craftsman lawn tractors and riding mowers. This part is made of metal, and is used in conjunction with the belt to transfer power from the engine to the machine. You will require a wrench when replacing this item. The engine pulley is sold as an individual replacement part.

Fix Number

FIX17016490

Manufacturer Part Number

597025001

Keep your Craftsman lawn tractor running smoothly with this genuine flat idler pulley, designed to help your blades cut cleanly and efficiently. This part keeps the blade belt tight, so your mower can do its job properly. If your blades aren’t spinning or cutting like they should, a worn or broken pulley might be the reason — and this replacement is just what you need. Made to fit select Craftsman models, this pulley is sold individually and is built to last. Replacing it is simple and only requires a 9/16-inch socket — no complicated tools or special skills needed. Whether you're tackling regular maintenance or fixing a sudden issue, this part helps get your mower back in action quickly. Crafted from durable materials to withstand outdoor conditions and mechanical stress, this pulley is sold individually and is an exact replacement part for select Craftsman models. Installation is straightforward and requires only a 9/16-inch socket, making it accessible for most DIY users and professionals alike.

Fix Number

FIX9014040

Manufacturer Part Number

532173435

This is a genuine replacement part that is sourced directly from the original equipment manufacturer for use with Husqvarna, Weed Eater and Poulan riding lawn mowers and garden tractors. The Mandrel Pulley 38 is the part that the belt attaches to and it helps to rotate the blade. You will need a wrench set to remove the old pulley and secure the new one. Keep in mind this high-quality component is made of durable metal and is sold as an individual item. Check the owners manual and the diagrams of your model for the exact location and the correct installation of this pulley.

Fix Number

FIX9014118

Manufacturer Part Number

532173437

This is an authentic manufacturer-sourced part that is specially made for use with riding lawnmowers and garden tractors. The idler pulley is used to secure the belt, unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. It is an identical replacement for a missing or a faulty component that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality idler pulley is made of durable metal and is sold individually. Note, the hardware to secure it is sold separately.

Fix Number

FIX9286062

Manufacturer Part Number

532139245

This is a genuine Husqvarna, Ryobi, Poulan and Weed Eater part for use with Lawn Tractors The deck idler pulley applies tension to the blade drive belt. The most common reason for replacing the deck idler pulley is when it breaks, causing the blades to not cut. This part is sold individually. The tool that you will need to replace the deck idler pulley is a 9/16 inch socket.