Weed Eater Lawn Tractor Bearings

Weed Eater Appliance Parts

Popular Weed Eater Lawn Tractor Bearings

Lawn Mower Flange Wheel Bearing
$12.05
In Stock
Fix Number
FIX9006914
Manufacturer Part Number
532009040
This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually but two are needed for each front wheel. It is recommended that they be replaced at the same time. Install this part with the flat side facing the grease zerk in the rear side of the wheel.
Fix Number
FIX9285698
Manufacturer Part Number
532110485
This is a single mandrel ball bearing for a mower. It is sold individually, however it is a good idea to have a couple of these on hand. This bearing is located on top of the shaft, which is part of the mandrel assembly. The mandrel assembly is bolted to the more deck. This bearing measures roughly 1-3/8-Inches inner diameter, 1.578-Inches outer diameter, and .475-Inches long.
Lawn Mower Bearing
$6.55
In Stock
Fix Number
FIX9010748
Manufacturer Part Number
532003366
This is an authentic OEM bearing for lawn tractors and lawn mowers. Bearings provide a cushion for moving components, so they do not damage due to the constant rubbing against each other. They also help to stabilize directional movement. Bearings tend to deteriorate over time, which is normal. They should be inspected and replaced regularly, so it may be a good idea to have a few on-hand. Keep in mind that this part includes one bearing only, gauges, washers, rings, etc. are all sold separately.
Mandrel Shaft Assembly
$41.12
In Stock
Fix Number
FIX9286040
Manufacturer Part Number
532137646
Original Manufacturer Approved replacement Mandrell Shaft Assembly used on Lawn Tractors/Mowers. Includes all Metal shaft assembly, bearing, and nut. The Mandrel shaft is secured in Mandrel Housing and it goes through the deck and the pulleys are attached to it. Then the belt that drives the mandrels is placed on the pulleys. When replacing this part, First remove the Blade from the Mandrel Shaft. The Mandrel Assembly is easily detached by removing the three Washer Head Screws from above the Mandrel Housing on the Mower Deck . You will need to remove the Nut that is attached to the Mandrel Shaft, which is located above the Mandrel Pulley. The complete Mandrel Assembly should come right out now. Remove old Shaft from the Housing and place a new one in place of it. Re-attach the now Complete Mandrel Assembly back to the deck and attach pulleys, belts and blades.
Steering Bushing
$6.55
In Stock
Fix Number
FIX9015678
Manufacturer Part Number
532195227
This manufacturer-supplied replacement part is designed for Husqvarna, Poulan and Weed Eater riding lawn mowers and garden tractors. The bushing helps to secure the steering wheel shaft on the steering boot. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. To ensure the exact location and the correct installation, refer to the diagrams of your specific model. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the steering wheel in order to gain access to the bushing.
Lawn Mower Washer Thrust
$6.55
In Stock
Fix Number
FIX9006893
Manufacturer Part Number
532006266
The thrust washer fits next to the ring and the 16 gauge washer. This is an authentic Craftsman replacement part used in compatible lawn tractors. This item is priced as an individual replacement. It is made of metal and may require a pair of pliers during the replacement of this part if it becomes broken.
Lawn Mower Bushing
$6.55
In Stock
Fix Number
FIX9285491
Manufacturer Part Number
532003645
This authentic manufacturer-sourced part is specially designed for Craftsman riding lawn mowers and garden tractors. It is an identical replacement for a faulty or a missing bushing that was installed on a new unit. This special component helps to secure the fuel tank stem while ensuring a tight seal. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the exact location and application of this component. Keep in mind this high-quality bushing is made of durable rubber and is sold individually.
Bushing Steering
$7.52
In Stock
Fix Number
FIX9016420
Manufacturer Part Number
532195228
This item is an original part from Poulan, Husqvarna, and Weed Eater for use in lawn mowers, lawn tractors, and trimmers. The bushing steering is made of plastic and attaches to the crossmember. You may need a set of pliers when replacing this part. It might break over time and will need replacing. Keep in mind that this item is sold individually.
Bushing-strg
$20.85
In Stock
Fix Number
FIX11824868
Manufacturer Part Number
587738901
This part is made out of metal. The bushings fit between the steering shaft and the steer plate and help to support both parts. If these parts become broken they will need to be replaced and may require a socket set and a wrench set during the installation. They are genuine OEM sourced parts which are specifically designed for use with ride mowers by Husqvarna, Poulan, and Weed Eater.
BUSHING, STEERING
$13.15
In Stock
Fix Number
FIX9011683
Manufacturer Part Number
532155106
This is a genuine replacement part manufactured for use with riding lawnmowers. This plastic bushing is used to guide the steering column through the frame, and reduce friction between the column and frame. This special bushing includes the bolts to mount it, and is sold as an individual replacement part.

Related Weed Eater Lawn Tractor Parts