Craftsman Lawn Tractor Parts

Craftsman Appliance Parts

Popular Craftsman Lawn Tractor Parts

Bearing
$6.21
In Stock
Fix Number
FIX9006914
Manufacturer Part Number
532009040
This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually but two are needed for each front wheel. It is recommended that they be replaced at the same time. Install this part with the flat side facing the grease zerk in the rear side of the wheel.
Ring Klip Number T5304-75
$3.99
In Stock
Fix Number
FIX9143890
Manufacturer Part Number
812000029
This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part of a mower wheel or steering assembly). When it is installed, the part that is visible acts as a shoulder, holding the specific component or assembly together. This very small metal ring clip (approximately 1-inch by 1-inch) is sold individually.
Bolt and Washer Assembly
$8.71
In Stock
Fix Number
FIX9020856
Manufacturer Part Number
532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
Blade Mower Hi Lift
$23.87
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX9017804
Manufacturer Part Number
532405380
This is a manufacturer-approved high quality replacement blade for a lawn tractor and is sold individually. It is used on 46-inch decks, and measures approximately 22-1/2 inches long and 2-3/4 inches wide. This blade is a high-lift blade (2-in-1 blade), meaning it is designed with curved tips that lift grass clippings up and out through the discharge chute into a grass bag (if applicable). By replacing a dull, bent, or damaged blade, this will ensure a better quality cut. For this repair, you will need a wrench to remove the blade bolt, and we recommend wearing gloves to protect your hands.
Washer 25/32 x 1-1/4 x 16 Ga.
$3.99
On Order
Fix Number
FIX9008998
Manufacturer Part Number
532121749
This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to spread the load under a bolt or screw. It also helps to reduce heat and friction as the fastener is tightened. This repair may require a screwdriver or socket wrench, depending on the fastener for your model. This is a single flat washer; the fasteners are sold separately.
Blade Mower
$16.18
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX9286056
Manufacturer Part Number
532138971
This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over time the blade may become dull or damaged causing irregular cutting patterns. Inspect your blades periodically and replace them as needed to maintain a clean cut lawn. It is a high-quality component which is made of durable steel and it is sold individually.
Bow Tie Cotter Pin
$3.99
In Stock
Fix Number
FIX9096195
Manufacturer Part Number
714-04040
This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.
Deck Engage Cable
$24.75
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11813377
Manufacturer Part Number
946-05124A
Blade High Lift
$17.43
In Stock
Fix Number
FIX9015048
Manufacturer Part Number
532180054
This is an OEM replacement part, sold individually. The High Lift Blade is also referred to as a 2 in 1 blade. It throws the clippings better, and is used when you are just discharging or bagging the grass clippings. If you want to Mulch your clippings you would want to purchase a Mulching Blade. This part is compatible with the mowers and tractors listed below. A wrench is needed for replacement.
Mandrel Pulley Assembly
$11.20
In Stock
Fix Number
FIX9015257
Manufacturer Part Number
532195945
This mandrel pulley is for lawn tractors. Mandrel pulley spins the blade on the mower deck of the tractor. Wear work gloves to protect your hands when installing this part.

Craftsman Lawn Tractor Appliance Types

Related Craftsman Lawn Tractor Parts

Popular Craftsman Lawn Tractor Models