Craftsman Lawn Mower Control Cables

Craftsman Appliance Parts

Popular Craftsman Lawn Mower Control Cables

Cable-engage W/sea
$31.58
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11813377
Manufacturer Part Number
946-05124A
This is an authentic OEM part. The MTD deck engage cable is composed of metal and plastic parts, and has been designed for use in several tractor machines. This part is fastened onto the frame assembly. The deck engage cable works to move belt idler pulley and engage the cutting blades. Please refer to manual for specific repair instructions. A wrench and a screwdriver is helpful in making the replacement. This part is sold individually.
Fixes these symptoms
Lawn Mower Engine Control Cable
$15.44
In Stock
Fix Number
FIX9015022
Manufacturer Part Number
532183567
This is a lawn mower engine control cable, also sometimes referred to as a zone control cable. This part is sourced directly from the manufacturer and is sold individually. It is comprised of a metal wire with Z-type bent ends, a rubberized exterior, and a plastic clip. This part is designed to stop the engine when you release the handle. The conduit measures approximately 52.5 inches and the cable measures roughly 61.5 inches.
Fixes these symptoms
Lawn Mower Cable
$14.16
In Stock
Fix Number
FIX9018907
Manufacturer Part Number
532427497
This is a genuine Craftsman part for use with Lawn Mowers. The zone control cable stops the engine when you let go of the handle. This part is sold individually. The most common reason for replacing the control cable is if it is broken, causing the brake to not release even when the lever is pressed. The tool that you will need to replace the zone control cable is pliers.
Lawn Mower Manual Clutch Cable
$33.80
In Stock
Fix Number
FIX9019323
Manufacturer Part Number
532435111
This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered and Poulan. This part attaches the lever to the idler arm on the mower deck and grants you access to disengage and engage the blades. This manual clutch cable includes the cable, cable sheath with connection clips and the spring hook. You will need a socket set to replace this part. This part is made of metal, rubber and wire.
Cable:engagement D
$66.08
In Stock
Fix Number
FIX10033928
Manufacturer Part Number
946-04173E
This is an OEM deck engagement cable, sold as one part. This part is for a lawnmower and its purpose is to engage the mowers blade, allowing you to control your engine zone. It consists of a metal wire cable, a rubber cover and an extension spring on one end and a Z-bend on the other. The cable casing length is approximately 39-inches and the inner wire length is about 56-inches.
Cable Clutch Manual With Spring.
$38.63
In Stock
Fix Number
FIX9019379
Manufacturer Part Number
532435110
Authentic replacement part used on Husqvarna riding lawn mowers/tractors. This cable consists of a metal wire cable with z-type bent end and rubberized cover/body. The clutch cable engages the deck. You may need pliers to complete this repair. • First you want to see where the old cable is attached • Just remove the cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable
Fixes these symptoms
Lawn Mower Zone Control Cable
$19.07
On Order
★★★★★
★★★★★
1 Review
Fix Number
FIX9180334
Manufacturer Part Number
946-1130
This Genuine OEM control cable is designed to connect the control handle to the engine mechanism on compatible lawn mowers, enabling safe and responsive blade engagement. When the control handle is pressed, the cable activates the blade rotation; releasing the handle stops the blade, ensuring operator safety. This specific part features a 40-inch covered housing with a total cable length of 53 inches, including 13 inches of exposed cable. It is sold individually and includes all necessary components for straightforward replacement. Please note that part number 946-1137 features a fully covered cable with a length of 53 inches. To ensure proper fit and function, carefully compare your existing cable before ordering.
Fixes these symptoms
Clutch Cable Kit
$50.73
In Stock
Fix Number
FIX9013361
Manufacturer Part Number
532175067
This is an authentic manufacturer sourced replacement part used on lawn mowers/tractors. It connects the mower engagement lever to the idler arm on the mower deck and allows you to engage and disengage the blades. Includes bold and the zip tie. You may need Pliers to complete this repair. • Remove the cable end from the control head and install the new one • Now you can run the new cable down to the control handle • Attach the other end of the cable • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable
Engine Zone Control Cable
$17.82
In Stock
Fix Number
FIX9014267
Manufacturer Part Number
532183281
This is a genuine item is supplied by the original equipment manufacturer for use with Poulan rotary lawn mowers. It is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owner's manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality rubberized engine zone control cable is sold individually.
Cable-variable Spe
$31.35
In Stock
Fix Number
FIX9166741
Manufacturer Part Number
946-04655A
This drive cable is an original part from the MTD manufacturer. This part is constructed of metal and wiring encased in plastic. The drive cable is compatible with many lawn mower machines. This item fastens the control lever assembly to the mower transmission. When the drive lever is pulled upward, the mower transmission is engaged. This part is sold individually. A wrench is helpful in making the repair.

Related Craftsman Lawn Mower Parts