Lawn Mower Bearings

Fix Number

FIX9006914

Manufacturer Part Number

532009040

This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually but two are needed for each front wheel. It is recommended that they be replaced at the same time. Install this part with the flat side facing the grease zerk in the rear side of the wheel.

Fix Number

FIX9285698

Manufacturer Part Number

532110485

This is a single mandrel ball bearing for a mower. It is sold individually, however it is a good idea to have a couple of these on hand. This bearing is located on top of the shaft, which is part of the mandrel assembly. The mandrel assembly is bolted to the more deck. This bearing measures roughly 1-3/8-Inches inner diameter, 1.578-Inches outer diameter, and .475-Inches long.

Fix Number

FIX9286874

Manufacturer Part Number

532187256

This genuine manufacturer-sourced component which is made for use with Craftsman riding lawn mowers and garden tractors. The blade is specially designed for bagging the grass clippings, unfortunately, over time it may wear out or get damaged eventually requiring a replacement to ensure a clean cut every time. Keep in mind this high-quality blade is made of durable metal and is sold individually. Please make sure to refer to the owners manual for the correct application of this item.

Fix Number

FIX9010748

Manufacturer Part Number

532003366

This is an authentic OEM bearing for lawn tractors and lawn mowers. Bearings provide a cushion for moving components, so they do not damage due to the constant rubbing against each other. They also help to stabilize directional movement. Bearings tend to deteriorate over time, which is normal. They should be inspected and replaced regularly, so it may be a good idea to have a few on-hand. Keep in mind that this part includes one bearing only, gauges, washers, rings, etc. are all sold separately.

Fix Number

FIX9286040

Manufacturer Part Number

532137646

Original Manufacturer Approved replacement Mandrell Shaft Assembly used on Lawn Tractors/Mowers. Includes all Metal shaft assembly, bearing, and nut. The Mandrel shaft is secured in Mandrel Housing and it goes through the deck and the pulleys are attached to it. Then the belt that drives the mandrels is placed on the pulleys. When replacing this part, First remove the Blade from the Mandrel Shaft. The Mandrel Assembly is easily detached by removing the three Washer Head Screws from above the Mandrel Housing on the Mower Deck . You will need to remove the Nut that is attached to the Mandrel Shaft, which is located above the Mandrel Pulley. The complete Mandrel Assembly should come right out now. Remove old Shaft from the Housing and place a new one in place of it. Re-attach the now Complete Mandrel Assembly back to the deck and attach pulleys, belts and blades.

Fix Number

FIX9416292

Manufacturer Part Number

741-04124

This is a high-quality OEM hex flange bearing for use in riding lawn tractors (sold individually). This part has multiple applications, so the location and repair information may differ depending on the model and reason for replacement. This metal hex flange is flat on one side (similar to a washer) and has a hexagon shape on the other. For this repair you will need a wrench to disassemble and assemble it.

Fix Number

FIX8887153

Manufacturer Part Number

1705897SM

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This bearing helps to secure the arbor shaft, allowing it to rotate. Bearings experience constant wear from pressure, heat, vibration, and friction eventually requiring replacements. This high-quality component is made of durable metal and is sold individually. A wrench set will be needed to perform this repair.

Fix Number

FIX9015678

Manufacturer Part Number

532195227

This manufacturer-supplied replacement part is designed for Husqvarna, Poulan and Weed Eater riding lawn mowers and garden tractors. The bushing helps to secure the steering wheel shaft on the steering boot. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. To ensure the exact location and the correct installation, refer to the diagrams of your specific model. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the steering wheel in order to gain access to the bushing.

Fix Number

FIX9006893

Manufacturer Part Number

532006266

The thrust washer fits next to the ring and the 16 gauge washer. This is an authentic Craftsman replacement part used in compatible lawn tractors. This item is priced as an individual replacement. It is made of metal and may require a pair of pliers during the replacement of this part if it becomes broken.

Fix Number

FIX16421956

Manufacturer Part Number

741-0493C

This authentic manufacturer-supplied part is designed for Craftsman snowblowers. Flange bushings are used to provide support for components while allowing them to rotate with minimum friction. It is made of high-quality material and is sold individually. Make sure to check the diagrams for your model to ensure the correct replacement procedure. You may need a screwdriver and a wrench set to take apart and reassemble the equipment when performing this repair.