Briggs and Stratton Engine Ignitions

Briggs and Stratton Appliance Parts

Popular Briggs and Stratton Engine Ignitions

Armature-magneto
$56.10
In Stock
Fix Number
FIX9045176
Manufacturer Part Number
591459
Hard starting or an engine that suddenly stops may point to a damaged magneto armature. This ignition coil turns magnetic energy from the spinning flywheel into the electrical pulse that fires the spark plug. First try a known-good spark plug and inspect the safety switches, grounding wire, terminals, and flywheel magnet. Confirm fit from the full engine identification numbers, since similar coils may mount differently. Work only with the engine off and cool. Disconnect the battery and spark plug lead before removing covers. During installation, use the air gap listed in the service manual and tighten the mounting screws evenly. Keep hands clear of the flywheel and use an insulated tester to check for spark.
Fixes these symptoms
Armature-magneto
$63.68
In Stock
Fix Number
FIX9278124
Manufacturer Part Number
397358
This magneto provides the spark your engine needs to start and run properly. It’s a durable replacement for a worn coil and installs easily—just set the correct gap and reconnect the wiring for smooth operation.
Fixes these symptoms
Engine Ignition Coil
$54.73
In Stock
Fix Number
FIX11829380
Manufacturer Part Number
595304
Ignition coil 595304 is an original equipment manufacturer (OEM) part that fits Briggs & Stratton lawn and garden equipment engine models 31R907-0018-G1, 33R877-0002-G1, 33R877-0009-G1 and 33S877-0015-G1. Ignition coil 595304 generates the voltage for the spark plug. Set the ignition coil air gap at 10/1000-in to 14/1000-in. Torque the ignition coil screws to 30-lb-in.
Fixes these symptoms
Armature-Magneto
$67.93
On Order
Fix Number
FIX9044018
Manufacturer Part Number
590454
This genuine replacement magneto is designed for Briggs & Stratton engines used in Toro lawn mowers. It plays a vital role in the ignition system by generating the electrical current needed to fire the spark plug. Made from high-quality materials, this part is sold individually. Note: The spark plug boot is sold separately. To replace the magneto, begin by removing the housing or covers from your mower. Next, remove the spark plug and bind the cylinder to prevent it from turning. Disconnect the ignition wires and remove the old ignition coil. Install the new magneto, carefully setting the correct air gap between the coil and the flywheel. Once installed, reassemble the unit and test for proper operation. A screwdriver set is recommended for this repair.
Fixes these symptoms
Armature-magneto
$39.26
On Order
Fix Number
FIX16444696
Manufacturer Part Number
84005272
This is a genuine OEM sourced replacement part designed for use with gas powered string trimmers and blowers. The ignition module also known as armature-magneto is designed to produce pulses of high voltage for the spark plugs. It is made from durable metal with a rubber insulated wire and it is sold individually. Please note the spark plug boot is sold separately.
Armature-magneto
$64.74
In Stock
Fix Number
FIX10015031
Manufacturer Part Number
796964
This magneto armature is an OEM part direct from Briggs & Stratton. Compatible with many small engines, this component provides the needed electrical voltage to the spark plug. This item is sold individually. You will need a screwdriver and a wrench set for the installation.
Armature-magneto
$74.34
In Stock
Fix Number
FIX8968253
Manufacturer Part Number
398811
This replacement armature-magneto also known as an ignition module is specially designed for use with Briggs and Stratton engines commonly used on Toro lawn and garden equipment. It is a genuine OEM sourced item that is sold individually. The purpose of this item is to produce pulses of high voltage for the spark plugs. Please note, the spark plug boot is sold separately. To complete this repair you will need screwdriver set.
Armarture-magneto
$63.38
In Stock
Fix Number
FIX12642135
Manufacturer Part Number
594626
This magneto armature ignition coil is designed to generate the high-voltage spark needed for reliable ignition in small single-cylinder engines. By converting low voltage into a consistent spark for the spark plug, it helps resolve issues such as hard starting, misfiring, or no-start conditions. Built for dependable performance and direct replacement, it restores smooth engine operation and reliable starting in lawn mowers and other outdoor power equipment.
Armature-magneto
$60.49
In Stock
Fix Number
FIX11829379
Manufacturer Part Number
595291
This replacement part is a genuine OEM sourced component which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The ignition module also known as an armature-magneto provides electric current for the ignition system by producing pulses of high voltage for the spark plugs. It is made of high-quality metal with a rubber insulated wire and it is sold individually, please note the spark plug boot is sold separately.
Armature-magneto
$77.48
In Stock
Fix Number
FIX9983294
Manufacturer Part Number
590781
This replacement armature-magneto also known as an ignition module is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Ignition coil supplies high voltage to the spark plug on the engine. If the ignition coil is defective, the engine may not start. To complete this repair you would need screwdriver set.

Related Briggs and Stratton Engine Parts