Briggs and Stratton Engine Parts

This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resistor type with a 14mm shell design, 3/8-inch reach, and 13/16-inch hex. The heat range is 9 for automotive, small engine, and ordnance applications. The LM indicates 14mm (special for lawn mowers). Before making this installation make sure to drain fuel from the tank and remove the old spark plug.

This is a filter cartridge for the air filter in various lawn equipment. The filter removes dirt, dust, and other debris from entering the carburetor, and contaminating the engine. If the engine in your machine is not operating properly, a dirty air filter could be the cause. This is a commonly replaced part, depending on usage we recommend checking it after a full season of use. You may clean this part once or twice using an air supply to keep it functioning properly. However, when it becomes dirty it must be changed.

This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carburetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.

Sold individually.