Part Location Diagram of WR17X2891 GE Plastic Tubing - 5/16 Inch
See part 812 in the diagram
Replacing your General Electric Refrigerator Plastic Tubing - 5/16 Inch
( Grid squares measure 1x1 inch )

Plastic Tubing - 5/16 Inch

Rated by 2 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$24.89
In Stock
Fix Number:
FIX292878
Manufacturer #:
WR17X2891
Manufactured by:
GE

Product Description

This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged, and use the union to attach the new water line to the old one. This tubing is sold individually and is an OEM part.

Videos For installing this part.

Replacing your Plastic Tubing - 5/16 Inch

Replacing your Plastic Tubing - 5/16 Inch

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.4 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Peter from Old Saybrook, CT
Parts Used:
WR02X11330, WR17X2891
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Wrench (Adjustable)
plastic tubing split, caused water leak
Note: That this repair was done on the old design with the threaded connections on the inlet water valve. The replacement valve has compression fittings. 5/16 water line gave up at the water inlet valve. First fixed 2yrs ago. was able to cut off enough damaged line and pull out the slack and got it back in and socked i t down no leaks. 2nd leak this time same brittle old line gave up again. Replaced the 5/16 line. from inlet valve. I cut the head off a bolt that barely fit in both old and new tube ends. Removed tube guide inside behind bottom bin and pulled old line until new line showed up spliced in union. Did have to remove inlet water valve this time to assure good connection. Because you can't buy a new 5/16 nut for that valve you have to make the old one work or you might be forced to buy a new inlet valve too. At which point the 1/4 ice line gave up. Repeated fix #1 on 1/4 line. reinstalled no leaks. Should have just done them both at same time. Did just order 1/4 line, 1/4 nut and fill tube grommet.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter B from Los Altos Hills, CA
Parts Used:
WR17X2891
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers
Fridge leaking, no water to door (but icemaker working)
The leak was due to brittle, broken tubing at the primary and secondary water valves due to the heat from the compressor (common). Once you remove the cover access assembly (Unit Parts #616, 5/16" hex head screws), you can pull both valves out as an assembly, held by one 1/4" hex head screw and a second 1/4" hex head screw holding the cop per main water feed line. Then you can easily see which water line is leaking. In my case it was the 5/16" line going to the water reservoir. I opened the union inside the fridge, and connected the old water line with the new water line by threading them both over a length of #12 machine screw with the head cut off. Then I pulled and fed the new line through to the valve. While the leak was recent, the water in the door had stopped working over a year ago. For whatever reason, fixing the water line also restored water flow to the door. I think there may still be some leakage from the John Guest fittings on the water valves. I'm not sure what the fix for that is.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX292878
Manufacturer Part Number: WR17X2891
Brand
Model Number
Description
Kenmore
36350221000
Refrigerator
Kenmore
36350222000
Refrigerator
Kenmore
36350227000
Refrigerator
Kenmore
36350232000
Refrigerator
Kenmore
36350237000
Refrigerator
Kenmore
36350242000
Refrigerator
Kenmore
36350247000
Refrigerator
Kenmore
36350622000
Refrigerator
Kenmore
36350627000
Refrigerator
Kenmore
36357552790
Refrigerator
Kenmore
36357552791
Refrigerator
Kenmore
36357557790
Refrigerator
Kenmore
36357557791
Refrigerator
Kenmore
36358062890
Refrigerator
Kenmore
36358062891
Refrigerator
Kenmore
36358062892
Refrigerator
Kenmore
36358062893
Refrigerator
Kenmore
36358062894
Refrigerator
Kenmore
36358062896
Refrigerator
Kenmore
36358062897
Refrigerator
Kenmore
36358067890
Refrigerator
Kenmore
36358067891
Refrigerator
Kenmore
36358067892
Refrigerator
Kenmore
36358067893
Refrigerator
Kenmore
36358067894
Refrigerator
Kenmore
36358067897
Refrigerator
Kenmore
36358072891
Refrigerator
Kenmore
36358072892
Refrigerator
Kenmore
36358072893
Refrigerator - Kenmore Refrigerator Model 363.58072893 (36358072893, 363 58072893) Parts
Kenmore
36358072894
Refrigerator