SEAL 180446
$6.51
In Stock
- Fix Number:
- FIX12425943
- Manufacturer #:
- 180446
- Manufactured by:
- DeWALT
Jump to:
Product Description
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers and staplers. The seal is used to prevent leaks between the head valve and the end cap spacer. This item is available as an individual replacement part.
-
Works with the following brands:Bostitch, DeWALT, Craftsman, Porter Cable
-
Works with the following products:Nailer
-
Part# 180446 replaces these:180446, P180446
- Works with the following brands:
- Bostitch, DeWALT, Craftsman, Porter Cable
- Works with the following products
- Nailer
- Part# 180446 replaces these:
- 180446, P180446
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
would not allow air in to nailer
After installing the parts from Fix.com I applied some 3 in 1 oil into the area where the piston is and also where your air nozzle connects. the more oil the better, hook up the air hose and good to go. You tube has many videos for helping as well.
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Combination Brad Nailer/Stapler would not operate
The plastic head valve inside the gun disintegrated. Common problem with old guns. Remove 4 screws (part1) with hex wrench and pull off back cap on gun. Try not to damage gasket (part3). Clean out all debris left by old head valve, If you can still use the o-ring from the head valve keep it. The original o-ring is not available buy I orde
... Read more
red a 33mmx2mm online and it works fine. Install per diagram using Vaseline or 3 in one oil on o-rings and cylinders. Make sure to put the flat face of the seal (part5) facing the back of the gun against the metal seal (part4), or it will leak air. Work the new head valve/seal inside the cylinder at the back of the cap to make sure that it compresses inside when it is tightened against the interior spring (part6). Re-Install 4 screws tightening opposite sides gradually so that head valve compresses into cylinder when tight. Should be good to go.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX12425943
Manufacturer Part Number: 180446
Manufacturer Part Number: 180446
| Brand | Model Number | Description |
|---|---|---|
| Craftsman | 351181700 | Nailer - Stapler |
| Craftsman | 351181710 | Nailer - Stapler |
| Craftsman | 351181720 | Nailer - Nailer |
| Craftsman | 351181730 | Nailer - Nailer |
| Craftsman | 351181740 | Nailer - Nailer |
| Porter Cable | BN200C | Nailer - Brad Nailer |
| Porter Cable | BN200CR | Nailer - Brad Nailer |
| Bostitch | BT1855 | Nailer - Oil-Free Brad Nailer |
| Bostitch | BT1855K | Nailer - 18 Gauge Brad Nailer |
| Bostitch | BTFP12233 | Nailer - Smart Point 18 GA Brad Nailer Kit |
| Craftsman | CMPBN18K | Nailer - 18ga Brad Nailer |
| Craftsman | CMPNC18K | Nailer - 18ga Nrrw Crwn Stplr |
| DeWALT | DWEHF1838K | Nailer - 18ga 7/32 Crwn Flr S |
| DeWALT | DWFP12231 | Nailer - 18 Gauge 2" Brad Nailer |
| DeWALT | DWFP12232 | Nailer - 18 Gauge 1-1/2" x 1/4" Narrow Crown Stapler |
| DeWALT | DWFP12233 | Nailer - 53445 |
| DeWALT | DWFP12233R | Nailer - Pin Nailer |
| DeWALT | DWFP1838 | Nailer - 18ga 1-1/2 Stapler |
| DeWALT | DWFP1838R | Nailer - Stapler |
| DeWALT | DWLHF2025K | - 20ga Engr Floor Stap |
| Bostitch | EHF1838K | Nailer - Flooring Stapler |
| Bostitch | LHF2025K | Nailer - Flooring Stapler |
| Porter Cable | NS150C | Nailer - 18G Stapler |
| Bostitch | SL1838BC | Nailer - Cap Stapler |
| Bostitch | SX1838 | Nailer - Pneumatic Brad Nailer & Stapler |
| Bostitch | SX1838K | Nailer - Oil-Free Stapler |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.