Models
>
DWEHF1838K
DWEHF1838K (Type 0) DeWALT Nailer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DWEHF1838K
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Jul 30
In Stock
Order now and your part arrives by Jul 30
$6.51
This is an OEM piston ring and is sold individually. The seal allows pressure in the cylinder when the gun is engaged. The pressure pushes the piston down into the cylinder. This piston ring will dete...
In Stock
Order now and your part arrives by Jul 30
$6.51
This is an OEM replacement O-ring for a nailer, sold individually. This O-ring is what seals the cylinder to the housing of the gun and creates separation between the upper and lower air chambers. Due...
In Stock
Order now and your part arrives by Jul 30
$6.51
This is an authentic OEM product which is designed for Bostitch, DeWALT and Porter Cable nailers and staplers. It provides a tight seal for the valve piston. Over time the material may wear down causi...
In Stock
Order now and your part arrives by Jul 30
$6.51
This part is an authentic replacement part used in various Bostitch and Porter Cable power tools. An o-ring is a gasket used to create a strong seal between solid pieces. It is a simple yet essential ...
In Stock
Order now and your part arrives by Jul 30
$12.09
This genuine OEM bumper in your nailer absorbs the impact and provides cushioning when the piston retracts after driving a nail. It is seated at the bottom of the nail gun cylinder. Due to the repeate...
In Stock
Order now and your part arrives by Jul 30
$6.51
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers and staplers. The seal is used to prevent leaks between the head ...
In Stock
Order now and your part arrives by Jul 30
$6.51
This is a genuine OEM sourced part that is intended to be used with pneumatic nailers and staplers from Bostitch, Porter Cable, and DeWalt. The metal spring is used to provide compression between the ...
In Stock
Order now and your part arrives by Jul 30
$6.51
This is an authentic manufacturer-sourced replacement component which is specially designed for use with staplers and nailers. It is generally utilized to provide an air-tight seal for the cylinder sl...
In Stock
Order now and your part arrives by Jul 30
In Stock
Order now and your part arrives by Jul 30
$6.51
This item is available as an individual replacement part. The cylinder sleeve fits between the piston driver assembly and the check seal. This part is an original part from Bostitch for use in nailers...
In Stock
Order now and your part arrives by Jul 30
$6.51
This replacement part is supplied directly from the original equipment manufacturer for use with Bostitch nailers and staplers. It is utilized to provide an air-tight seal for the cylinder sleeve, ple...
In Stock
Order now and your part arrives by Jul 30
Common Problems and Symptoms for DWEHF1838K
Viewing 3 of 3Won't fire
Fixed by these parts
How to fix it
Leaks air from top
Fixed by these parts
How to fix it
Driver won't return
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Matthew from Morton Grove, IL
- Parts Used:
- 180201
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
Broken magazine end cap prevents magazine from latching closed
1. Use belt clip on staple gun to hold in place on workbench.
2. Use a hammer with a punch or small screwdriver to hit the two pins holding the end cap to the magazine. Repeat ad nauseum with as much force as you can muster until both pins come out and the broken end cap can be removed.
3. Align new end cap on magazine and use s ... Read more ame procedure to drive pins. Exercise caution with the shorter of the two pins. If not perfectly aligned, the plastic tabs on the end cap can easily break off.
2. Use a hammer with a punch or small screwdriver to hit the two pins holding the end cap to the magazine. Repeat ad nauseum with as much force as you can muster until both pins come out and the broken end cap can be removed.
3. Align new end cap on magazine and use s ... Read more ame procedure to drive pins. Exercise caution with the shorter of the two pins. If not perfectly aligned, the plastic tabs on the end cap can easily break off.
Read less
Was this instruction helpful to you?
Thank you for voting!