Part Location Diagram of 4280EN4001A LG BEARING,BALL
See part K121 in the diagram
( Grid squares measure 1x1 inch )

BEARING,BALL 4280EN4001A

Rated by 2 customers 

?

A Bit Difficult 

More than 2 hours 

Ratings submitted by customers like you who bought this part.

?
$70.33
In Stock
Fix Number:
FIX12075836
Manufacturer #:
4280EN4001A
Manufactured by:
LG

Product Description

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack Houston
November 17, 2025
The machine makes alot of noise when spinning the water out of the load. Is this what could be making the noisr?
For model number WM1812CW
Fix.com logo
Hello Jack, thank you for contacting us. Yes, you will need to replace the tub bearings to fix the issue. The bearings could be worn out or damaged, causing the loud noises. The rear tub bearing is part number FIX12075836, and the front tub bearing is part number FIX11705911. We hope this information helps!

Was this helpful?
Thank you for voting!
Related Parts:

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 1.8 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Mark from Garrison, ND
Parts Used:
4280EN4001A, 4280EN4001B, 4036ER4001C, 4036ER2003A
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Washer was making a lot of noise in the spin cycle.
Decided that the problem was the rear tub bearings so watched several YouTube videos describing how to make the repair. These were very good. Really recommend this if you don't have any experience with appliance work. Went to the site and used diagrams to determine which parts I needed to order. Parts came very fast. Biggest part of job was dismantling the washer. Because of bearings location you have to take almost everything apart. Once tub was removed from washer and separated into two parts, I removed the seal and pounded out the bearings. Then I carefully installed the new bearings making sure not to damage them and put everything back together. Have used the machine quite a bit since making the repair and so far no problems. If you are a bit handy you should have no serious problems. If not, hire it done.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Helendale, CA
Parts Used:
4434ER0003F, 4280EN4001A, 4280EN4001B, 4036ER4001C, 4036ER2003A
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
Spider drum drive cracked, violent shaking and banging of Drum
Remove rear panel, remove top (it slides backward) then remove control panel and soap dispenser, remove gasket from door side only, , leave rear gasket attached to outer drum, remove front panel . Remove nut off of spider shaft, remove all screws and the 2 shocks and 2 large springs and counter weights from around the outer drum then re move front of outer drum, inner drum or tub will pull out front, it may take some work to get shaft of spider out of bearings and seal in back. Once inner drum is out remove old spider bolts, heat will be necessary or you will ruin the bolts holding the spider to the inner drum. Replace spider and lock-tite bolts in, if seal and bearings are good, slide new spider and drum into place and bolt spider shaft into back of washer. Check outer drum gasket and replace if necessary. reassemble outer drum halfs, attaché shocks and springs, add front panel and attach door gasket, front panel and top.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX12075836
Manufacturer Part Number: 4280EN4001A
Brand Model Number Description
LG 48842800 Washer Dryer Combo - Washer-Dryer
LG F1073ND Washer - Washer
LG F1273ND Washer - Washer
LG WD-1070FH Washer - LG Washing Machine Model WD-1070FH (WD1070FH, WD 1070FH) Parts
LG WD-1243FHB Washer - LG Washing Machine Model WD-1243FHB (WD1243FHB, WD 1243FHB) Parts
LG WD-1243RHD Washer - LG Washing Machine Model WD-1243RHD (WD1243RHD, WD 1243RHD) Parts
LG WD-1245RHD Washer - LG Washing Machine Model WD-1245RHD (WD1245RHD, WD 1245RHD) Parts
LG WD-1274FHB Washer
LG WD-3243RHD Washer Dryer Combo - WASHER/DRYER COMBINATION
LG WD-3245RHD Washer Dryer Combo - WASHER/DRYER COMBINATION
LG WD-90282BD Washer - LG Washing Machine Model WD-90282BD (WD90282BD, WD 90282BD) Parts
LG WD-90286BD Washer - LG Washing Machine Model WD-90286BD (WD90286BD, WD 90286BD) Parts
LG WD10580BD Washer - Wd-10580bd
LG WD10583BD Washer - Wd-10583bd
LG WD1243FHB Dryer - Dryer
LG WD1243RHD Washer - Wd-1243rhd
LG WD1245RHD Washer - Wd-1245rhd
LG WD90280BD Washer - Wd-90280bd
LG WD90286BD Washer - Wd-90286bd
LG WM1375HW Washer
LG WM1812CW Washer - Residential WASHER
LG WM1814CW Washer - Lg Washing Machine Wm1814cw/00
LG WM1815CS Washer - Residential WASHER
LG WM3431HS Washer - Lg Washing Machine Wm3431hs/00
LG WM3431HW Washer - Lg Washing Machine Wm3431hw/00