Models > WD-1070FH

WD-1070FH LG Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Locking Pin – Part Number: 4774FR3118B
$14.48
The locking pin is used to hold the shock absorber on the washer. There is a pin used at the bottom and top of the shock absorber. Sold individually.
Special Order
Gasket – Part Number: 4036ER2003A
$25.22
This genuine OEM drum seal gasket prevents water from leaking between the outer tub and spin basket of your washer. It is made of black rubber and measures 2.5 inches in diameter. If your washer is le...
In Stock
Ball Bearing – Part Number: MAP61913715
$49.27
This bearing, or ball, is a genuine OEM replacement part for your washer. The bearing allows the tub to rotate smoothly. Replacing this part can be helpful if your washer is extremely loud, or vibrate...
In Stock
Bolt Assembly – Part Number: 4040FR4051C
$11.41
In Stock
Holder – Part Number: 4930FR3040A
$9.92
In Stock
Bracket,Base – Part Number: 4810ER3016A
$16.58
In Stock
BEARING,BALL – Part Number: MAP61913714
$34.45
Special Order
Spanner – Part Number: 3W20018B
$21.78
In Stock
Chamber,Air – Part Number: 3504FR3134A
$8.28
Special Order
Cap,Cover – Part Number: 5006FR3179A
No Longer Available
Bellows – Part Number: 4738FR1145A
$49.27
Special Order
SWITCH ASSEMBLY,LOCKER – Part Number: 6601ER1001B
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WD-1070FH

Viewing 2 of 2
Burning smell
Fixed by these parts
Fixing
How to fix it
Leaking
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
David from BOWLING GREEN, KY
Parts Used:
MAP61913714, MAP61913715, 4036ER2003A
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Bearings were going out. Washer made extremely loud noise while spinning at high or medium speed. Also had burning smell when spinning
I followed the 35 min video on front loader bearing and seal replacement to a T. I went step by step pausing the video as the technician completed the task. It took 5 hours for me to complete which included the cleanup time. I am extremely happy how this turned out. It runs as good as a new machine. I did however find that our particu lar machine had an extremely large amount of mildew and mold inside the outer tub casing and attached to the spider arm. More than likely after seeing all this mold when it comes time for the next repair we will probably buy a new top loader. The repair parts and video were perfect! Thanks for the help. Local repair company recommended to me to just buy a new washer when I inquired about them repairing.
Read less
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Todd from LAKEWOOD, CO
Parts Used:
4930FR3040A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Drum spring broke
Removed top panal found broken parts and pieces, replaced spring and plastic spring holder. Straightened out and reattached drum front boot.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from HYDE PARK, VT
Parts Used:
4036ER2003A
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
While replacing the tub support (spider) I chose to replace the gasket.
The spider repair and the tub seal replacement are fairly complicated, and time-consuming, but manageable with patience. I viewed the youtube video that showed the process, which gave me confidence. It entails disassembling the machine and removing quite a few major pieces. Take care with the numerous screws and bolts, and be patient and you can be successful. Plan a lot of time for all the steps.
The hardest part is putting the door bellows back on.
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More