Official Whirlpool Washer Valves

Water Inlet Valve

$68.29

Fix Number: FIX12348013
Manufacturer Part Number: W11165546

If your washer isn’t filling properly or is leaking near the back, this inlet valve might be the problem. It controls how hot and cold water enter your machine during the wash cycle. With two inlets and three push-on connectors, it’s easy to install using a screwdriver and wrench. Just make sure to unplug your washer and turn off the water first. This part fits many models—check yours to be sure it’s the right match.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Watch the install video

Water Inlet Valve with Mounting Bracket

$31.88

★★★★★

2 Reviews

Fix Number: FIX334646
Manufacturer Part Number: 285805

There are many symptoms that may indicate an issue with your water inlet valve. These can include your washer not filling with water, it will not stop filling, the washer is leaking, or it is both filling and draining at the same time. You can test if your valve is faulty two different ways. The first is to disconnect the power while the washer fills, if water continues to fill the tub, then the valve should be replaced. The second way is to use a multimeter to test for continuity on the valve solenoids. If you do need to replace the water inlet valve, this is a genuine OEM part that has two ports and is compatible with half-inch ID hose. Before beginning your repair, please be sure to disconnect the power and water supply to your washing machine.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Watch the install video

Water Inlet Valve

$65.23

★★★★★

1 Review

Fix Number: FIX12349267
Manufacturer Part Number: W11210459

If your washer is leaking, will not fill with water, or will not stop filling, there may be an issue with your water inlet valve. This part is used to control the flow of hot and cold water into the washer. If there is reduced water flow, first check if the screens on the valve are blocked with debris. A multimeter can be used to test if the valve is faulty or not. Please be sure to disconnect both the power and water supply to your washer before replacing the valve.

Fixes these symptoms

Cycle Not Advancing
Leaking
No hot or cold water
See more...

Watch the install video

Washer Water Inlet Valve with Thermistor

$59.11

★★★★★

2 Reviews

Fix Number: FIX11749042
Manufacturer Part Number: WPW10144820

This part is used to help control and balance the water temperature flowing in to the washer tub.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Water Inlet Valve

$95.10

Fix Number: FIX12349461
Manufacturer Part Number: W11220230

The water inlet valve plays a crucial role in your washing machine’s operation by controlling the flow of hot and cold water into the tub. If the valve is damaged or worn out, you may experience slow filling, no water at all, or leaks beneath the appliance. This OEM replacement features dual inlets and is designed for a secure fit. To install, you’ll need basic tools to access and remove the old valve. Once replaced, your washer should return to normal water flow and performance.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Watch the install video

Washer Water Inlet Valve

$55.03

★★★★★

1 Review

Fix Number: FIX11745050
Manufacturer Part Number: WP8182862

If your washer isn’t filling right or leaking from the back, this dual water valve could be the fix. It controls hot and cold water flow and fits many Whirlpool, Maytag, and KitchenAid models. Easy to install—just unplug the washer and turn off the water first. Sold individually.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Water Inlet Valve

$60.13

Fix Number: FIX11773194
Manufacturer Part Number: W11038689

This inlet valve helps your washer fill with hot and cold water during each cycle. If your machine isn’t getting water or shows an error, this part might be the fix. It’s easy to plug in with the included wire harness and fits many models. You’ll need a screwdriver or socket wrench to install it—just be sure to unplug the washer and turn off the water first.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Watch the install video

Washer Water Inlet and Valve Assembly

$70.33

★★★★★

1 Review

Fix Number: FIX11757114
Manufacturer Part Number: WPW10683603

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

VALVE

$72.37

Fix Number: FIX17216730
Manufacturer Part Number: W11688995

Ensure optimal water flow in your washing machine with this double water inlet valve, engineered for consistent performance across multiple appliance brands. It controls the entry of hot and cold water into the washer and is compatible with select models from Whirlpool, Maytag, KitchenAid, and more. To avoid installation issues, confirm your model number before ordering, as similar-looking parts may vary slightly in design.

Fixes these symptoms

Does not dispense fabric softener or detergent
Leaking
No hot or cold water
See more...

Water Inlet Valve Assembly

$91.44

Fix Number: FIX12349269
Manufacturer Part Number: W11210463

Ensure your washing machine fills properly with this dual water inlet valve, designed to manage the flow of both hot and cold water during each wash cycle. Equipped with two inlets and an integrated wire harness, this component uses electric solenoids to control water entry based on your machine’s settings. If your washer is slow to fill or not filling at all, a faulty or worn-out valve may be the cause. Replacing it requires basic tools such as a screwdriver, wrench, and pliers, and can typically be completed with minimal effort. Sold individually, this valve is a reliable replacement part for restoring your washer’s performance—just be sure to confirm compatibility with your specific model before installation.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Whirlpool Washer Valves

Popular Whirlpool Washer Valves

Related Whirlpool Washer Parts

Whirlpool Washer Valves

Start With Your Model Number

Popular Whirlpool Washer Valves

Related Whirlpool Washer Parts