Official LG Washer Dryer Combo Valves

Water Inlet Valve - Hot

$36.42

Fix Number: FIX3527427
Manufacturer Part Number: 5220FR2006H

The hot water valve is found at the back of your washer and controls the flow of hot water into the machine. If the valve is defective, the washer may leak, overfill, fill slowly, or not fill with water at all. If this happens the valve should be replaced. There are a couple different methods for testing if your hot water valve is defective. The first is to use a multimeter on the solenoid, the second is to unplug the washer while it is running. If water continues to flow into the machine, then the valve is defective. This genuine OEM part has a standard hose fitting inlet, one water outlet, and measure approximately 3 inches long by 3 inches wide. To complete this repair, you will need to disconnect the water and power supply to your washer and pull it out from the wall so you can access the back panel.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Washer Water Inlet Valve

$142.61

★★★★★

1 Review

Fix Number: FIX12374721
Manufacturer Part Number: AJU75152601

This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stopping in the middle of a cycle, you may need to replace the water inlet valve. Be sure to disconnect the power and water supply before you begin this repair.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Watch the install video

Water Inlet Valve - Cold

$74.74

Fix Number: FIX11728995
Manufacturer Part Number: 5220FR2075L

If your washing machine is leaking, slow to fill, will not stop filling with water, or is not filling at all, the cold-water inlet valve may be defective. The purpose of the valve is to open to allow water into the washer, and is used for cold water, liquid bleach, and prewash cycles in your washing machine. This is a genuine OEM replacement part that measures approximately 4 inches long and 3 inches wide. It has a standard hose fitting inlet along with two outlets facing 45 degrees to the right and one outlet facing 45 degrees to the left. When replacing this part, you will want to disconnect the power and water to your washer and remove the fill hoses. You will need to pull the machine out far enough so that you are able to access the back panel where the valves are located.

Fixes these symptoms

Does not dispense fabric softener or detergent
Leaking
No hot or cold water
See more...

Watch the install video

Inlet Valve Assembly

$132.20

Fix Number: FIX3527452
Manufacturer Part Number: 5221ER1003A

This water inlet valve controls cold water flow for the bleach dispenser and prewash cycles. It has one standard hose inlet and three angled outlets—two to the right, one to the left. Designed for select washing machines, it ensures proper water distribution. Disconnect power and water before installation.

Fixes these symptoms

Leaking
Water Filling Issues
See more...

Inlet Valve Assembly

$100.96

Fix Number: FIX12587936
Manufacturer Part Number: 5221ER1003S

This inlet valve assembly controls the flow of hot and cold water into the washing machine, ensuring proper pressure and volume for each cycle. Made from durable, rust-resistant materials, it’s a reliable replacement for worn or leaking valves. Designed for select LG models, it helps restore efficient water control and washing performance.

Fixes these symptoms