LG Washer Dryer Combo Pumps

★★★★★

★★★★★

4 Reviews

Fix Number

FIX3579318

Manufacturer Part Number

4681EA2001T

This is a drain pump motor assembly for washers. This OEM part is responsible for removing water from the washer during the drain part of the cycle. When this part is clogged, damaged or defective it can cause the washer to not drain properly. Keep in mind that the pump casing is sold separately. This repair is rated medium-difficulty and can vary depending on the model. For this repair you will need a Philips screwdriver, a small flat blade screwdriver, needle nose pliers, and slip joint pliers. Do not forget to disconnect the power before you begin this repair. In general, this repair can be started by removing the top of the washer followed by the front panel. Moving down the front of the appliance, remove the door, latch, tub gasket, and drainer cover. The drain hoses and clip will need to be disconnected from under the drain assembly. To install the new pump motor, reassemble parts in the reverse order. We recommend taking photos while disassembling and keeping screws and parts neatly organized.

Fix Number

FIX11706439

Manufacturer Part Number

5859EA1004P

This drain pump helps your LG or Kenmore washer get rid of water after each cycle. If your washer isn’t draining, leaves water in the tub, or makes strange noises, replacing the pump could fix it. It’s a reliable part with a strong motor and fits many models. Just unplug your washer before installing.

Fix Number

FIX3522306

Manufacturer Part Number

383EER2001A

This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.

★★★★★

★★★★★

1 Review

Fix Number

FIX3634741

Manufacturer Part Number

3108ER1001E

Fix Number

FIX3518247

Manufacturer Part Number

3108ER1001A

This genuine OEM washer drain pump housing provides a secure mounting base for the drain pump, filter, and connected hoses, helping ensure proper water drainage during wash cycles. Made from durable plastic, it plays a key role in preventing leaks and supporting smooth pump operation. Replacing a damaged or worn housing can resolve issues such as water leaks, noisy operation, or failure to drain properly.

Fix Number

FIX16878251

Manufacturer Part Number

AHA75853813

This drain pump assembly removes wastewater during appliance operation, supporting proper drainage and preventing standing water. Designed for reliable performance, it helps maintain efficient operation. Replacing a failing pump can resolve drainage issues or abnormal noise.

Fix Number

FIX12750085

Manufacturer Part Number

AHA75693425

This genuine drain pump assembly removes water from the washer drum and helps prevent leaks and drainage issues. It’s a durable, quiet-running replacement for faulty pumps and fits select models. Replace it if your washer isn’t draining properly or is making noise during the drain cycle.

Fix Number

FIX7791903

Manufacturer Part Number

EAU61383506

Fix Number

FIX16662425

Manufacturer Part Number

EAU65058601

Fix Number

FIX12076143

Manufacturer Part Number

5859EN1004J