Tappan Refrigerator Ice Makers

★★★★★

★★★★★

5 Reviews

Fix Number

FIX12364147

Manufacturer Part Number

241798231

This is a genuine OEM ice maker assembly for your refrigerator. The ice maker makes eight cubes at a time, by filling the mold with water from the inlet valve, freezing the water until the cubes are formed, and then ejecting them into the storage bucket. This process will repeat until the ice bucket is full. If your device is not making ice cubes, the ice maker assembly may need to be replaced. Please ensure that you disconnect the power and water supply to your fridge before beginning this repair. This kit includes the fill cup, a four-pin wire harness adapter, and tube.

Fix Number

FIX735469

Manufacturer Part Number

5303918277

This part is the replacement heat-release ice maker unit only. This kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that converts the harness to three round female and one round male connectors.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX1526412

Manufacturer Part Number

241685101

This genuine replacement ice dispenser drum is designed for use with a wide range of refrigerator models. Made from durable plastic, the drum plays a key role in your ice maker by capturing ice and directing it to the crusher for dispensing. It is positioned between the ice dispenser drive plate and the ice crusher mounting plate, ensuring smooth and efficient operation. If the drum becomes damaged or worn, replacing it is a simple process. All you’ll need is a Phillips head screwdriver. Just remove the necessary components to access the drum, unfasten it, and install the new one in its place. This part is sold individually and is compatible with many refrigerator models—check your model’s diagram to confirm fit.

Fix Number

FIX1526586

Manufacturer Part Number

241734001

This genuine OEM ice container, also known as an ice bucket, is designed for use in refrigerators to store ice cubes. It should be replaced if it develops significant cracks or breaks that could affect performance. To remove the container, open the freezer door and lift it out, ensuring the ice maker’s shut-off arm is in the off position. Transfer the front panel, access door, shield, crusher assembly, and auger assembly from the old container to the new one—without disassembling the crusher and auger assembly, if possible, to simplify the process. When aligning the control rod, make sure one set of crimps sits in front of the crusher assembly plate and the other behind it. To secure the other end, hook the spring around the tab at the bottom of the container and tuck the bracket behind the tab. Engage the rod’s hook by rotating it into the flapper door. Reinstall the front panel and access door by aligning the holes and fastening them in place. Finally, snap the guard back onto the side rails of the bin, ensuring the ridged edge faces forward. Please note that this replacement part includes only the ice bucket; additional components must be purchased separately.

Fix Number

FIX2378689

Manufacturer Part Number

241885001

This dispenser crusher housing, also known as a refrigerator ice crusher housing, is a genuine replacement part compatible with various refrigerator models. It functions as a protective cover for the ice crushing blades located within the ice container. To complete this repair, you’ll need a Phillips screwdriver, a flat-blade screwdriver, a 1/4-inch nut driver, and a pair of channel lock pliers. Wearing work gloves is recommended for safety. Please note that the replacement part may differ in appearance or color from the original, but it is designed to fit and function exactly the same.

Fix Number

FIX2349843

Manufacturer Part Number

5304469403

The ejector drive gear is a part for your refrigerator. This icemaker drive gear is for the ejector blades. The part rotates the cube ejector arm, which cycles the icemaker and pushes the cubes out and into the ice bucket, ready for the ice to be used. The outside diameter of this piece is almost two inches by two inches. The reason for needing to replace your gear is if the current one is broken/missing a tooth, or if your icemaker is not dispensing ice and is noisy.

Fix Number

FIX1991244

Manufacturer Part Number

241726501

Fix Number

FIX1526550

Manufacturer Part Number

241716101

If your fridge isn’t dispensing ice like it used to, the auger might be the issue. This screw-shaped part spins to push ice from the bin into the chute, so you get ice right when you need it. A quick replacement can fix jams or weak dispensing and get your ice maker working smoothly again. It’s built to fit a range of models and installs easily.

Fix Number

FIX2349842

Manufacturer Part Number

5304469402

Fix Number

FIX1526413

Manufacturer Part Number

241685201