Roper Refrigerator Ice Makers

Replacement Ice Maker

★★★★★

★★★★★

6 Reviews

The ice maker works by filling with water from the inlet valve, freezing it into cubes, and then dispensing the cubes into the storage bucket. It will then refill with water and repeat this process until the ice storage bucket is full. If yours is not making ice or it is leaking, it may be time to replace the ice maker. Depending on usage and water quality, these should be replaced every three to ten years. Please note that this kit does not come with a new shut off arm (also known as a bail arm). You will need to reuse the arm from your old ice maker, or you can purchase a new one separately. This genuine OEM parts kit includes the replacement ice maker, wire harnesses (flat and round plug versions), and the mounting hardware. The wire harness from your old ice maker can also be reused if you choose. This model is approximately 11x5 inches in size, made of plastic and metal, and is black and silver in color. This model does not work with refrigerators that have the ice auger on the door, it is meant to sit in the upper left hand of the freezer. Please ensure that you disconnect the power and water supply before beginning this repair.

Ice Bucket

★★★★★

★★★★★

1 Review

If you need a new bucket for your ice maker, this is a genuine OEM replacement part. Over time and with regular use, the ice bucket can become cracked and not function properly. If this happens the bucket should be replaced so you can continue to use the ice maker as intended. This includes just the bucket, when replacing this part, you will need to remove the other components from the old ice bucket and reinstall them onto the new piece.

Ice Maker

★★★★★

★★★★★

1 Review

This is the icemaker only. You must use the wire harness, cover and bail arm from the original icemaker. This is an icemaker for your refrigerator/freezer. Take note that this part does not include the front cover, the wire harness, or the shut-off arm. These must be ordered separately or recycled from your old unit. This unit as a whole will allow your appliance to produce ice. This model makes eight radius ice cubes.If your ice maker is no longer making ice, dispensing ice, or if it is leaking, it will need to be replaced.

Icemaker Control Assembly This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

Ice Bin Auger Drum

★★★★★

★★★★★

1 Review

This white ice bin auger drum comes with a washer.

Ice Container This ice bin collects the ice cubes dropped from the icemaker. The auger is NOT included with this bin.

Icemaker Motor Kit This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

Add-On Icemaker Assembly This icemaker kit comes with a flat plug, wiring harness, fill tube, water inlet valve, ice bin, mounting hardware, and instructions.

Water Fill Cup and Bearing

★★★★★

★★★★★

1 Review

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

Add-on Ice Maker Kit This kit includes everything needed to install the new icemaker. Note: This part has been updated by the manufacturer, it may differ in appearance but will still function the same as the original.