Hotpoint Refrigerator Door Shelves

Hotpoint Appliance Parts

Popular Hotpoint Refrigerator Door Shelves

Fix Number
FIX299562
Manufacturer Part Number
WR2X9144
The end cap is used to hold the retainer bar on the fridge door in place. This genuine OEM part is made of white plastic and can be used for either the left or righthand side of the bar. The retainer bar keeps items from falling off the shelf when the fridge door is open and closed. If an end cap has become damaged, the retainer bar may not stay in place properly. The end caps are sold individually, so if you need to replace more than one, please be sure to order the correct quantity. To replace an end cap, you will need a small flat blade screwdriver to release the locking tabs.
Fix Number
FIX299579
Manufacturer Part Number
WR2X9162
This is a replacement shelf bar end cap. The end cap connects to the shelf bar on either side, and then snaps into position on the freezer door. This will allow you to store items in the freezer door. It is a little more than 2 inches long and is made of white plastic. To replace the end cap, you can simply depress the locking tab and remove the entire bar and end cap assembly. Then, use a flat blade screwdriver to depress the locking tab, and the endcap will detach. Finally, snap the new end cap locking tabs into place, and snap the bar assembly back onto the freezer door. This product is sold individually.
Door Shelf Retainer Bar
$28.60
In Stock
Fix Number
FIX293627
Manufacturer Part Number
WR17X3880
This door shelf retainer bar is a manufacturer-approved replacement part for your refrigerator. This bar is made of white plastic and is about 21 1/4 inches in length and 2 inches deep. It helps keep your refrigerator door shelf in place. To access the retainer bar, remove the door bin by pulling it out from the mounting tabs.
Fix Number
FIX298758
Manufacturer Part Number
WR2X7975
This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.
Door Shelf End Cap
$15.17
In Stock
Fix Number
FIX298590
Manufacturer Part Number
WR2X7674
Sold individually.
Door Shelf Retainer Bar End Cap
$10.37
In Stock
Fix Number
FIX299346
Manufacturer Part Number
WR2X8797
Single Door Handle End Cap Trim - Chrome
$61.41
Special Order
Fix Number
FIX298635
Manufacturer Part Number
WR2X7791
Screws are sold separately.
Door Shelf Retainer Bar End Cap
$23.05
In Stock
Fix Number
FIX298308
Manufacturer Part Number
WR2X6934
This retainer bar end cap can be used for either the left or right hand side.
Retainer Bar End Cap
$28.36
In Stock
Fix Number
FIX298435
Manufacturer Part Number
WR2X7283
This white retainer bar end cap is used to hold the shelf in place. It can be used for the left or right side.
No Longer Available
Fix Number
FIX299258
Manufacturer Part Number
WR2X8699
This part is the replacement door shelf retainer bar end cap for the left side of your refrigerator door. The end cap is approximately 4 inches by 5 inches and is made of white plastic. The end cap snaps into place on the refrigerator door so you can attach the door shelf retainer bar to the inner door liner. The main reason to replace the end cap is if it is broken, and the retainer bar cannot connect to the refrigerator door. To replace the end cap, simply disconnect it from the refrigerator door and the shelf retainer bar, and replace it with a new end cap. This part is for the left side of the shelf bar only, and the cap for the right side is sold separately. This is an OEM part from the manufacturer.

Related Parts