Electrolux Refrigerator Thermostats

Defrost Thermostat Kit This is a genuine OEM kit for the defrost thermostat in your freezer. This kit comes with the clip, leads, and heat shrink. Some indicators that you may need to replace your thermostat is if there is excessive frost in your fridge or freezer, or the appliance will not defrost. Using a multimeter, you can determine if the thermostat is faulty. The thermostat is located behind a panel in the back of the freezer, so you will need to empty out the shelves in order to access it. Please be sure to disconnect the power supply to your appliance before beginning this repair. The tools you will need for this project include a 1/4-inch nut driver, wire strippers, and a heat gun or blow dryer. After you have replaced the thermostat, your fridge and freezer should start cooling again within 30 minutes of being plugged in.

Defrost Thermostat The thermostat senses that the heat near the cooling coils has reached the desired temperature.

Cold Control Thermostat This cold control thermostat cycles on and off regularly to keep your refrigerator cold.

Defrost Thermostat This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.

Defrost Thermostat

Defrost Thermostat

Air Damper

Damper Control Assembly with Seal

Ice Mold Thermostat