Crosley Refrigerator Drawers and Glides

Crosley Appliance Parts
Shop By Part Type

Popular Crosley Refrigerator Drawers and Glides

$11.48
In Stock
Crisper Cover Support - Front
Fix Number FIX2358880
Manufacturer Part Number 241993101
If opening and closing your refrigerator is difficult, it could be due to a damaged or warped crisper cover front support. This part keeps the crisper shelf in place and mounts to the inside cabinet wall. Sold individually, this part is white in color, measures approximately 1 inch in diameter, and can be used for the front and rear support. The installation of this part is considered easy and should only take a few minutes. You will need a small flat blade screwdriver, putty knife, and soft hammer. Take the crisper and shelf out of the refrigerator first. To remove the old part, start by pushing the locking pin into the interior of the cabinet using the screwdriver, pull the support out with the putty knife. If taking out the pin is difficult, use a flat blade screwdriver to push it down and out of sight, this will not harm your refrigerator. Remove the pin and attach the new support, using a soft hammer to lock the new pin in place.
Fixes these symptoms
$48.61
In Stock
Drawer Support Rail - Right Side
Fix Number FIX430917
Manufacturer Part Number 240530701
The drawer track support provides support for the right side of the sliding drawer to help it move open and closed easily. This part is sold individually, so if you also require the left side rail it will need to be ordered separately. It measures roughly 16 inches long by 1 inch high. If it is damaged it might make it difficult to open and close the fresh food drawer. Check the support rails in case something is blocking it. It is important to replace a damaged rail to prevent it from damaging the drawer itself. The only tool required for this repair is a Philips screwdriver. Remove the entire upper shelf from the inside of the fridge. Place the assembly on a flat work surface. Remove the screws on the back holding the back rail in place. Next, disengage the tabs holding the old right side rail in place. When installing the new one, line up the slotted opening on the rail to the tabs on the drawer and push it in until it snaps into place. Reinstall the back rail with screws. Check the operation of the drawer and place it back into the refrigerator.
Fixes these symptoms
$107.38
In Stock
Refrigerator Crisper Pan
★★★★★
★★★★★
1 Review
Fix Number FIX429854
Manufacturer Part Number 240337103
This authentic replacement crisper pan, also known as a vegetable drawer, inserts into the refrigerator crisper area. It is used to hold produce and maintain an ideal temperature to help preserve them as long as possible. The pan is clear plastic and measures roughly 11 inches deep, 22 inches long, and is sold individually.
Fixes these symptoms
$66.59
In Stock
Refrigerator Crisper Drawer with Humidity Control
★★★★★
★★★★★
10 Reviews
Fix Number FIX11739119
Manufacturer Part Number WP2188656
This is a genuine OEM replacement crisper drawer for refrigerators. It is sold as an individual part. The crisper drawer with humidity control allows you to adjust the humidity within the crisper, which can help preserve the quality of your produce. It attaches to the inner part of the refrigerator to the bottom of the crisper shelf. If your crisper drawer is missing, cracked, damaged, or discolored, it needs to be replaced. It is made of durable clear plastic with a white handle and is sold individually. No tools are needed for installation, simply slide the new crisper drawer into the tracks.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Door won’t open or close
  • See more...
$57.38
In Stock
Refrigerator Center Crisper Drawer Slide Rail - White
★★★★★
★★★★★
3 Reviews
Fix Number FIX11757048
Manufacturer Part Number WPW10671238
This part is the center crisper drawer slide rail which helps to support the crisper drawers in your refrigerator. If you have difficulty opening or closing your crispers, the center slide rail may be broken and needs to be replaced. Too much weight on the shelf above or in the crisper drawers may cause the center slide rail to break. Replacing this part is easy and does not require any tools. First remove any items off the crisper shelf along with the crisper drawers, then carefully remove the glass shelf. Once you can access the broken center slide rail, gently pull forward on the crisper shelf frame and pull the rail out. Take your new part and line up the locator tab at the rear of the rail, pull the crisper shelf forward, and drop the new rail into place. You can then replace the glass shelf and the crisper drawers, which should now easily slide in with the new rail installed. This is a genuine OEM part, made of white plastic and approximately 13.5 inches in length.
Fixes these symptoms
  • Clicking sound
  • Door won’t open or close
  • Fridge and Freezer are too warm
  • See more...
$46.63
In Stock
Drawer Support Rail - Left Side
Fix Number FIX430916
Manufacturer Part Number 240530601
If you notice that opening and closing the meat pan drawer in your refrigerator has become difficult, there may be an issue with the support rails. Regular wear and tear, or excess weight on the shelf can cause damage to the rail. This genuine OEM part is specifically for the left side of the drawer support. If you need to replace the right-side rail, that part can be purchased separately. Replacing this part is simple, and just requires the use of a screwdriver. Remove all items from the shelf and drawer in your fridge, remove the entire shelf assembly and place on a solid work surface, then use the screwdriver to remove the old rail. Line up the new rail, and screw back onto the shelf frame. Test that the drawer slides in and out easily, place everything back into the fridge, and you are done!
Fixes these symptoms
$85.75
In Stock
Crisper Glass Shelf Insert
Fix Number FIX429963
Manufacturer Part Number 240350608
This glass shelf sits above the crisper drawers in your refrigerator. This part is just the glass, there are no brackets or additional mounting hardware (these can be purchased separately if needed). Regular wear and tear or excess weight can cause damage to the shelf, and it should be replaced if damaged. No tools are required to do this, simply remove the old part and carefully place the new shelf glass down ensuring it is lined up properly with the shelf lip. This is a genuine OEM part that measures 23.82 inches by 15.50 inches.
$132.90
In Stock
Refrigerator Crisper Drawer
Fix Number FIX2361214
Manufacturer Part Number 240351061
The crisper drawer, also known as a crisper pan, is a clear plastic drawer found in your refrigerator. They typically hold fruits or vegetables, and the drawer has a slide control that will allow you to adjust the humidity level for the drawer. Regular wear and tear or excess weight in the pan can cause them to become cracked or damaged. This is an authentic OEM part to replace your broken crisper drawer. No tools are required to remove or replace the drawer.
Fixes these symptoms
$99.08
In Stock
Refrigerator Crisper Drawer Cover
Fix Number FIX2363600
Manufacturer Part Number 240364787
This is a genuine OEM replacement crisper drawer cover for your refrigerator. It measures approximately 27 inches by 20 inches and does not include the glass insert for the self. You can reuse the glass from your current drawer cover or purchase it separately if required. This piece sits above the two side-by-side crisper drawers and is made of white plastic.
Fixes these symptoms
$85.27
In Stock
Upper Crisper Drawer Cover - Glass NOT Included
★★★★★
★★★★★
2 Reviews
Fix Number FIX648823
Manufacturer Part Number 240350702
The upper crisper drawer cover is the frame that supports the crisper drawer and holds the glass shelf. Excess weight and regular wear can cause damage to the frame, and if broken it should be replaced. The drawer glides for the crisper are molded on to the frame, but the crisper drawer and glass are not included with this part. If you require replacement glass or crisper drawers, they can be purchased separately. Replacing this genuine OEM part is simple; remove the old frame from your refrigerator and lift the glass out. Snap the new frame cover back into place in the fridge, then line up and insert the glass shelf.
Fixes these symptoms

Related Parts